WorldCat Identities

Davim, J. Paulo

Overview
Works: 263 works in 1,333 publications in 2 languages and 53,133 library holdings
Genres: Conference papers and proceedings 
Roles: Editor, Author, Other, Contributor
Publication Timeline
.
Most widely held works by J. Paulo Davim
Nanocomposites : materials, manufacturing, and engineering by J. Paulo Davim( )

10 editions published in 2013 in English and held by 1,455 WorldCat member libraries worldwide

"Composite materials are engineered materials, made from two or more constituents with significantly different physical or chemical properties which remain separate on a macroscopic level within the finished structure. Due to their special mechanical and physical properties they have the potential to replace conventional materials. In nanocomposites the size of one phase is less than 100 nm in at least one dimension. Nanocomposites with polymer, metal or ceramic matrices find increasing application in bioengineering, battery cathodes, automotives, sensors and computers."--Page [4] of cover
Biomedical composites : materials, manufacturing, and engineering( )

10 editions published between 2013 and 2014 in English and held by 1,454 WorldCat member libraries worldwide

Composite materials are engineered materials, made from two or more constituents with significantly different physical or chemical properties which remain separate on a macroscopic level within the finished structure. Due to their special mechanical and physical properties they have the potential to replace conventional materials in various fields such as the biomedical industry
Drilling of composite materials by J. Paulo Davim( )

10 editions published in 2009 in English and held by 1,323 WorldCat member libraries worldwide

Metal cutting : research advances( )

9 editions published in 2010 in English and held by 1,322 WorldCat member libraries worldwide

Tribology of composite materials( )

14 editions published between 2010 and 2012 in English and held by 1,321 WorldCat member libraries worldwide

Micro and nanomanufacturing research( )

9 editions published between 2010 and 2012 in English and held by 1,293 WorldCat member libraries worldwide

Metal matrix composites : materials, manufacturing and engineering by J. Paulo Davim( )

10 editions published in 2014 in English and held by 1,075 WorldCat member libraries worldwide

Metal Matrix Composites (MMC's) have found an increased use in various industries duetotheir special mechanical and physical properties. They are a composite material with at least two constituent parts, one being a metal and are made by dispersing a reinforcing material into a metal matrix. The markets are: telecommunications, automotive, power semiconductor, opto-electronics, military and aerospace, heavy transportation, space systems and satellites, medical, and industrial lighting. Applications within these markets include microwave, micro-electronic packaging, laser diode, HB-LED's, and advanced radar
Metal matrix composites by Nanjappan Natarajan( )

14 editions published between 2011 and 2015 in English and held by 994 WorldCat member libraries worldwide

This book is dedicated to composite materials, presenting different synthesis processes, composite properties and their machining behaviour. The book describes also the problems on manufacturing of metal matrix composite components. Among others, it provides procedures for manufacturing of metal matrix composites and case studies
Wood and wood products by J. Paulo Davim( )

9 editions published between 2012 and 2013 in English and held by 982 WorldCat member libraries worldwide

Artificial intelligence in manufacturing research by J. Paulo Davim( )

13 editions published between 2010 and 2013 in English and held by 979 WorldCat member libraries worldwide

Manufacturing Technology Research by J. Paulo Davim( )

5 editions published between 2011 and 2012 in English and Undetermined and held by 967 WorldCat member libraries worldwide

Soft computing techniques for machining of composites : special topic volume with invited peer reviewed papers only by S. R Karnik( )

8 editions published in 2013 in English and held by 958 WorldCat member libraries worldwide

Even though composites are manufactured to near net shaped, machining has to be performed during the final production stage to get the finished products. Soft computing is a collection of methodologies that aim to exploit tolerance for imprecision, uncertainty and partial truth to achieve tractability, robustness and low solution cost. This special volume intends to draw a picture of the recent advances made in the soft computing assisted machinability studies for composite materials and includes the submission of high quality research articles. Suitable topics include the application to the machining (turning, drilling, milling) of the composites like metal matrix composites, fiber reinforced composites, glass epoxy polymer composites, polyamides and PEEK using various soft computing techniques such as artificial neural networks, fuzzy logic, particle swarm optimization and simulated annealing
Metal cutting technologies : progress and current trends by J. Paulo Davim( )

9 editions published in 2016 in English and held by 955 WorldCat member libraries worldwide

This book covers current trends in metal cutting, including traditional processes (turning, milling, drilling, etc), non-traditional processes (EDM, USM, LAM, etc), abrasive cutting, high speed cutting, high efficiency cutting, micromanufacturing, and internet-based manufacturing
Manufacturing technology research( )

7 editions published between 2011 and 2013 in English and held by 947 WorldCat member libraries worldwide

Machinability of Fibre-Reinforced Plastics( )

5 editions published in 2015 in English and German and held by 838 WorldCat member libraries worldwide

Presents Polymer-based fibre reinforced composite materials and addresses the characteristics like low density and coefficient of thermal expansion, specific strength with better fatigue resistance and modulus. The authors attend to the application problematic given that the structural components integration requires machining even after they precisely fabricated in most of the high production rate industries like aerospace and automobiles
Machining & forming technologies( )

3 editions published in 2011 in English and held by 789 WorldCat member libraries worldwide

Productivity and organizational management( )

9 editions published in 2017 in English and held by 763 WorldCat member libraries worldwide

Effective work practices and good employee relations are a real necessity of nowadays organizations, as they can help to reduce absenteeism, turnover, organizational costs, conducting to high levels of commitment, effectiveness, performance as well as productivity. Addressing these questions, this book focuses on the implications of changes in productivity and organizations management, exploring models, tools and processes
Mechatronics by J. Paulo Davim( )

17 editions published between 2011 and 2013 in English and Undetermined and held by 762 WorldCat member libraries worldwide

The term Mechatronics is a combination of the words mechanics and electronics . It is the blending of mechanical, electronic, and computer engineering into an integrated design and implementation. Mechatronics systems employ microprocessors and software as well as special-purpose electronics
Machining of titanium alloys and composites for aerospace applications : special topic volume with invited peer reviewed papers only by R Zitoune( )

7 editions published in 2013 in English and held by 760 WorldCat member libraries worldwide

A growing concern in the aerospace, automotive and biomedical industrial segments of the manufacturing industry is to build absolute reliability with maximum safety and predictability of the performance of all machined components. This requires development and deployment of predictive models for detailing the effects of varying machining parameters on fatigue life of machined components. The fatigue life is mainly affected by the residual stresses developed during the machining. Residual stresses are produced due to plastic deformation material while machining. The plastic deformation generates cracks and micro structural changes, as well as large micro hardness variations. Residual stresses have consequences on the mechanical behaviour, especially on the fatigue life of the workpieces. Residual stresses are also responsible for the machining distortion phenomenon of the machined parts which lead to difficulties during assembly. The literature detailing the effects of varying operating parameters on tool life when machining Titanium alloy is comprehensive, however, relatively little of this data refers to their effects on machined workpiece surface integrity particularly, residual stress generation and distortion created. Greater knowledge of the effects of operating parameters on surface integrity is critical to the acceptance of new environment, cutting path and cutting sequence strategies on machining of Ti6Al4V aerospace alloys to increase the functional requirements and fatigue life of the milled thin components. In this book four chapters have been included to address the above reported issues
Progress in green tribology : green and conventional techniques( )

11 editions published in 2017 in English and held by 760 WorldCat member libraries worldwide

Tribology is usually defined as "the science and technology of interacting surfaces in relative motion". It includes the research and application of principles of friction, wear, lubrication and design. Green tribology involves tribological aspects of environmental and biological impacts. This multidisciplinary field of science and technology is very important for the development of new products in mechanics, materials, chemistry, life sciences and by extension for all modern industry. The current volume aims to provide recent information on progress in green tribology. Chapter 1 provides information on tribological materials (an eco-sustainable perspective), while chapter 2 is dedicated to preparation and tribology performance of bio-based ceramic particles from rice waste and chapter 3 describes tribological behavior and tribochemistry of Ti3SiC2 in water and alcohols. Chapter 4 contains information on modelling and analysis of the oil-film pressure of a hydrodynamic journal bearing lubricated by nano based bio-lubricants using a D-optimal design. Finally, chapter 5 is dedicated to wear performance of oil palm seed fibre reinforced polyester composite aged in brake fluid solutions. The current volume can be used as a research book for final undergraduate in engineering courses or as a topic on green tribology at postgraduate level. This book can also serve as useful reference for academics, researchers, mechanical, materials, environmental and manufacturing engineers, professionals green tribology and related industries
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.07 (from 0.00 for Manufactur ... to 0.35 for Mechatroni ...)

Manufacturing Technology Research
Covers
Metal cutting : research advancesTribology of composite materialsMicro and nanomanufacturing researchArtificial intelligence in manufacturing researchManufacturing Technology ResearchMechatronics
Alternative Names
Davim, J. P.

Davim, J. P. 1964-

Davim, J. Paulo

Davim, J. Paulo, 1964-

Davim, João Paulo

Davim, João Paulo 1964-

Davim, Paulo 1964-

Languages
English (185)

German (2)