WorldCat Identities

George C. Marshall Space Flight Center

Overview
Works: 3,878 works in 5,983 publications in 1 language and 224,684 library holdings
Genres: Conference papers and proceedings  History 
Roles: Funder, Organizer of meeting, Printer
Publication Timeline
.
Most widely held works about George C. Marshall Space Flight Center
 
moreShow More Titles
fewerShow Fewer Titles
Most widely held works by George C. Marshall Space Flight Center
Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 9, for the period 1 April 1987 through 30 June 1987 by Enrico Lorenzini( Book )

11 editions published between 1985 and 1987 in English and held by 1,015 WorldCat member libraries worldwide

A new sun : the solar results from Skylab by John A Eddy( Book )

5 editions published in 1979 in English and held by 798 WorldCat member libraries worldwide

Science in orbit : the shuttle & spacelab experience, 1981-1986( Book )

6 editions published in 1988 in English and held by 758 WorldCat member libraries worldwide

Skylab, our first space station by George C. Marshall Space Flight Center( Book )

2 editions published in 1977 in English and held by 726 WorldCat member libraries worldwide

Heliophysics : the solar and space physics of a new era : recommended roadmap for science and technology 2009-2030 by NASA Advisory Council( Book )

2 editions published in 2009 in English and held by 541 WorldCat member libraries worldwide

Skylab, classroom in space by United States( Book )

4 editions published in 1977 in English and held by 536 WorldCat member libraries worldwide

The Skylab student project was designed and administered by the National Science Teachers Association. The National Aeronautics and Space Administration invited students in United States high schools to submit proposals for experiments that could be performed on board Skylab by the astronauts during their tours of duty. Experiments were designed to make the best possible use of the Skylab environment. The purpose of the student project was to encourage interest in science and engineering careers. Student experiments included studies of the central nervous system, cells in space, embryo development in space, weight and weightlessness, fluids in zero gravity, exploring the stars and planets, celestial objects in space, particle physics in space, and observing Earth from space. Science demonstrations included fluid behavior in zero gravity, mechanics, magnetic effects, particle physics, crystal growth, and life sciences
Space operations : exploration, scientific utilization, and technology development by Craig A Cruzen( )

6 editions published in 2011 in English and held by 484 WorldCat member libraries worldwide

This book includes a selection of 30 reviewed and enhanced manuscripts published during the 14th SpaceOps Conference held in May 2016 in Daejeon, South Korea. The selection was driven by their quality and relevance to the space operations community. The papers represent a cross-section of three main subject areas: · Mission Management – management tasks for designing, preparing and operating a particular mission. · Spacecraft Operations – preparation and implementation of all activities to operate a space vehicle (crewed and uncrewed) under all conditions. · Ground Operations – preparation, qualification, and operations of a mission dedicated ground segment and appropriate infrastructure including antennas, control centers, and communication means and interfaces. This book promotes the SpaceOps Committee’s mission to foster the technical interchange on all aspects of space mission operations and ground data systems while promoting and maintaining an international community of space operations experts
Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 4, for the period 22 December 1985 through 21 March 1986 by Enrico Lorenzini( )

3 editions published between 1985 and 1986 in English and held by 408 WorldCat member libraries worldwide

Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 6, for the period 22 June 1986 through 21 September 1986 by Enrico Lorenzini( )

2 editions published in 1986 in English and held by 406 WorldCat member libraries worldwide

Plasma and magnetospheric research : quarterly progress report : January 1985 - March 1985 by Richard H Comfort( )

5 editions published in 1985 in English and held by 395 WorldCat member libraries worldwide

Marshall Space Flight Center, 1960-1985 : anniversary report by George C. Marshall Space Flight Center( )

4 editions published between 1985 and 1988 in English and held by 389 WorldCat member libraries worldwide

Autonomous momentum management for space station : final report, 15 October 1984( )

4 editions published in 1984 in English and held by 354 WorldCat member libraries worldwide

Space platform expendables resupply concept definition study : addendum( )

4 editions published in 1985 in English and held by 354 WorldCat member libraries worldwide

Engineering and programming manual : two-dimensional kinetic reference computer program (TDK) by Gary R Nickerson( )

3 editions published in 1985 in English and held by 344 WorldCat member libraries worldwide

Development of a qualification standard for adhesives used in hybrid microcircuits by James J Licari( )

3 editions published in 1981 in English and held by 338 WorldCat member libraries worldwide

Permeability testing of impacted composite laminates for use on reusable launch vehicles by A. T Nettles( )

2 editions published in 2001 in English and held by 329 WorldCat member libraries worldwide

Since composite laminates are beginning to be identified for use in reusable launch vehicle propulsion systems, an understanding of their permeance is needed. A foreign object impact event can cause a localized area of permeability (leakage) in a polymer matrix composite, and it is the aim of this study to assess a method of quantifying permeability-after-impact results. A simple test apparatus is presented, and variables that could affect the measured values of permeability-after-impact were assessed. Once it was determined that valid numbers were being measured, a fiber/resin system was impacted at various impact levels and the resulting permeability measured, first with a leak check solution (qualitative) then using the new apparatus (quantitative). The results showed that as the impact level increased, so did the measured leakage. As the pressure to the specimen was increased, the leak rate was seen to increase in a nonlinear fashion for almost all the specimens tested
High-speed observer : automated streak detection in SSME plumes by T. J Rieckhoff( )

3 editions published in 2001 in English and held by 328 WorldCat member libraries worldwide

Friction stir welding for aluminum metal matrix composites (MMC's) : (MSFC Center director's discretionary fund final report, project no. 98-09) by J. A Lee( )

2 editions published in 1999 in English and held by 323 WorldCat member libraries worldwide

This technical memorandum describes an investigation of using friction stir welding (FSW) process for joining a variety of aluminum metal matrix composites (MMC's) reinforced with discontinuous silicon-carbide (SiC) particulate and functional gradient materials. Preliminary results show that FSW is feasible to weld aluminum MMC to MMC or to aluminum-lithium 2195 if the SiC reinforcement is less than 25 percent by volume fraction. However, a softening in the heat-affected zone was observed and is known to be one of the major limiting factors for joint strength. The pin tool's material is made from a low-cost steel tool H-13 material, and the pin tool's wear was excessive such that the pin tool length has to be manually adjusted for every 5 ft of weldment. Initially, boron-carbide coating was developed for pin tools, but it did not show asignificant improvement in wear resistance. Basically, FSW is applicable mainly for butt joining of flatplates. Therefore, FSW of cylindrical articles such as a flange to a duct with practical diameters ranging from 2-5 in. must be fully demonstrated and compared with other proven MMC joining techniques for cylindrical article
Investigation of springback associated with composite material component fabrication (MSFC Center director's discretionary fund final report, project 94-09) by M. A Benzie( )

4 editions published in 1997 in English and held by 321 WorldCat member libraries worldwide

A comparison of quasi-static indentation to low-velocity impact by A. T Nettles( )

5 editions published in 2000 in English and held by 318 WorldCat member libraries worldwide

A static test method for modeling low-velocity foreign object impact events to composites would prove to be very beneficial to researchers since much more data can be obtained from a static test than from an impact test. In order to examine if this is feasible, a series of static indentation and low-velocity impact tests were carried out and compared. Square specimens of many sizes and thicknesses were utilized to cover the array of types of low-velocity impact events. Laminates with a pi/4 stacking sequence were employed since this is by far the most common type of engineering laminate. Three distinct flexural rigidities under two different boundary conditions were tested in order to obtain damage ranging from that due to large deflection to contact stresses and levels in-between to examine if the static indentation-impact comparisons are valid under the spectrum of damage in-between to examine if the static indentation-impact comparisons are valid under the spectrum of damage modes that can be experienced. Comparisons between static indentation and low-velocity impact tests were based on the maximum applied transverse load. The dependent parameters examined included dent depth, back surface crack length, delamination area, and to a limited extent, load-deflection behavior. Results showed that no distinct differences could be seen between the static indentation tests and the low-velocity impact tests, indicating that static indentation can be used to represent a low-velocity impact event
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.45 (from 0.33 for Skylab, ou ... to 0.66 for Environmen ...)

Covers
Organizational communication imperatives : lessons of the space program
Alternative Names

controlled identityUnited States. National Aeronautics and Space Administration

Canolfan Teithio'r Gofod, Marshall

Centre de Vol Espacial Marshall

centre de vol spatial Marshall

Centro de Voos Espaciais Marshall

Centro Marshall de vuelos espaciales

Centrum Lotów Kosmicznych imienia George'a C. Marshalla

Förenta staterna

Förenta staterna. George C. Marshall Space Flight Center

Forente stater National Aeronautics and Space Administration. George C. Marshall Space Flight Center

George C. Marshall Space Flight Center

George C. Marshall Space Flight Center, Huntsville, Ala

George C. Marshall Space Flight Center Huntsville, Ala Space Science Laboratory

Huntsville, Ala George C. Marshall Space Flight Center

M.S.F.C.

M.S.F.C. (George C. Marshall Space Flight Center)

Maršalo kosminių skrydžių centras

Marshall (George C.) Space Flight Center

marshall Space Flight Center

Marshall Space Flight Center Huntsville, Ala.

Marshall Uzay Uçuş Merkezi

MSC

MSFC

MSFC (George C. Marshall Space Flight Center)

NASA Marshall Space Flight Center

NASA MSFC

National Aeronautics and Space Administration George C. Marshall Space Flight Center

Spojené státy americké George C. Marshall Space Flight Center

The George C. Marshall Space Flight Center

United States George C. Marshall Space Flight Center

United States George C. Marshall Space Flight Center, Huntsville, Ala

United States Marshall Space Flight Center, Huntsville, Ala

United States. National Aeronautics and Space Administration. George C. Marshall Space Flight Center

United States. National Aeronautics and Space Administration. George C. Marshall Space Flight Center, Huntsville, Ala

Διαστημικό Κέντρο Πτήσεων Μάρσαλ

Космический центр Маршалла

מרכז טיסות החלל מרשל

مركز مارشال لبعثات الفضاء

مرکز پروازهای فضایی مارشال

ศูนย์การบินอวกาศมาร์แชล

მარშალის კოსმოსური ფრენის ცენტრი

マーシャル宇宙飛行センター

馬歇爾太空飛行中心

Languages
English (118)