WorldCat Identities

American Association of State Highway and Transportation Officials

Overview
Works: 2,563 works in 4,536 publications in 2 languages and 129,729 library holdings
Genres: Specifications  Handbooks, manuals, etc  Periodicals 
Roles: Other, Editor
Classifications: TE7, 625.795
Publication Timeline
Key
Publications about American Association of State Highway and Transportation Officials Publications about American Association of State Highway and Transportation Officials
Publications by American Association of State Highway and Transportation Officials Publications by American Association of State Highway and Transportation Officials
Most widely held works about American Association of State Highway and Transportation Officials
 
moreShow More Titles
fewerShow Fewer Titles
Most widely held works by American Association of State Highway and Transportation Officials
Standard specifications for transportation materials and methods of sampling and testing by American Association of State Highway and Transportation Officials ( )
49 editions published between 1950 and 2014 in English and held by 939 WorldCat member libraries worldwide
Contains materials specifications and test methods commonly used in the construction of highway facilities
AASHTO LRFD bridge design specifications, customary U.S. units by American Association of State Highway and Transportation Officials ( )
37 editions published between 1994 and 2012 in English and held by 818 WorldCat member libraries worldwide
Accompanying CD-ROM contains AASHTO LRFD bridge design specifications. Customary Units
Standard specifications for highway bridges by American Association of State Highway and Transportation Officials ( Book )
40 editions published between 1949 and 2009 in English and held by 475 WorldCat member libraries worldwide
"The Specifications for Highway Bridges are intended to serve as a standard or guide for the preparation of State specifications and for reference by bridge engineers. Primarily, the specifications set forth minimum requirements which are consistent with current practices, and certain modifications may be necessary to suit local conditions. They apply to ordinary highway bridges, and supplemental specifications may be required for unusual types and for bridges with spans longer than 500 feet."--Introduction
AASHTO guide for design of pavement structures, 1993 by American Association of State Highway and Transportation Officials ( )
8 editions published in 1993 in English and held by 400 WorldCat member libraries worldwide
Freeway geometric design for active traffic management in Europe ( )
3 editions published in 2011 in English and held by 364 WorldCat member libraries worldwide
A scanning study of England, Germany, the Netherlands, and Spain to examine the use of innovative geometric design practices and techniques to improve the operational performance of congested freeway facilities without compromising safety. Managed motorways are a combination of active or dynamically managed operational regimes, specific designs of infrastructure, and technology solutions. The concept uses a range of traffic management measures to actively monitor the motorway and dynamically control speeds, add capacity, and inform road users of conditions on the network with the objective to optimize traffic and safety performance
Pavement markings, design and typical layout details by Bruce E Friedman ( )
3 editions published in 2006 in English and held by 361 WorldCat member libraries worldwide
Guidelines for concrete mixtures containing supplementary cementitious materials to enhance durability of bridge decks ( )
3 editions published in 2007 in English and held by 352 WorldCat member libraries worldwide
Aesthetic concrete barrier design by D. Lance Bullard ( )
3 editions published in 2006 in English and held by 351 WorldCat member libraries worldwide
Seismic analysis and design of retaining walls, buried structures, slopes, and embankments by National Cooperative Highway Research Program (Etats-Unis) ( )
2 editions published in 2008 in English and held by 341 WorldCat member libraries worldwide
This report explores analytical and design methods for the seismic design of retaining walls, buried structures, slopes, and embankments. The Final Report is organized into two volumes. NCHRP Report 611 is Volume 1 of this study. Volume 2, which is only available online, presents the proposed specifications, commentaries, and example problems for the retaining walls, slopes and embankments, and buried structures
A policy on geometric design of highways and streets : 2004 by American Association of State Highway and Transportation Officials ( Book )
16 editions published between 1979 and 2012 in English and Italian and held by 338 WorldCat member libraries worldwide
Guidance for the design and application of shoulder and centerline rumble strips ( )
3 editions published in 2009 in English and held by 331 WorldCat member libraries worldwide
This report provides guidance for the design and application of shoulder and centerline rumble strips as an effective crash reduction measure, while minimizing adverse effects for motorcyclists, bicyclists, and nearby residents. Using the results of previous studies and the research conducted under this project, safety effectiveness estimates were developed for shoulder rumble strips on rural freeways and rural two-lane roads and for centerline rumble strips on rural and urban two-lane roads
Blast-resistant highway bridges design and detailing guidelines by Eric B Williamson ( )
3 editions published in 2010 in English and held by 322 WorldCat member libraries worldwide
Explores code-ready language containing general design guidance and a simplified design procedure for blast-resistant reinforced concrete bridge columns. The report also examines the results of experimental blast tests and analytical research on reinforced concrete bridge columns designed to investigate the effectiveness of a variety of different design techniques
LRFD design and construction of shallow foundations for highway bridge structures ( )
5 editions published in 2010 in English and held by 322 WorldCat member libraries worldwide
This report develops and calibrates procedures and modifies the AASHTO LRFD Bridge Design Specifications, Section 10-Foundations for the Strength Limit State Design of Shallow Foundations. The material in this report will be of immediate interest to bridge engineers and geotechnical engineers involved in the design of shallow foundations
Guidelines for ramp and interchange spacing by Brian Ray ( )
3 editions published in 2011 in English and held by 321 WorldCat member libraries worldwide
TRB's National Cooperative Highway Research Program (NCHRP) Report 687: Guidelines for Ramp and Interchange Spacing explores guidelines for ramp and interchange spacing based on design, operations, safety, and signing considerations. The report is designed to help aid the decision-making process when an agency is considering new ramps or interchanges on existing facilities, modifying ramps and interchanges of existing facilities, or when planning and designing new highway and interchange facilities. The guidelines also offer standardized definitions measuring ramp and interchange spacing, which have varied in previous design guides. A final report documenting the full research effort related to the development of NCHRP Report 687 was published as NCHRP Web-Only Document 169
Recycling and reclamation of asphalt pavements using in-place methods by Mary Stroup-Gardiner ( )
3 editions published in 2011 in English and held by 317 WorldCat member libraries worldwide
"Discusses the use of hot in-place recycling, cold in-place recycling, and full-depth reclamation of asphalt pavements. In-place recycling and reclamation of asphalt pavements provides agencies with the ability to optimize the value of in-place materials, minimize construction time and traffic flow disruptions, and reduce the number of construction vehicles moving in and out of the construction area."--Provided by publisher
Design of concrete structures using high-strength steel reinforcement ( )
2 editions published in 2011 in English and held by 317 WorldCat member libraries worldwide
TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaulates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online
Guide for pavement-type selection ( )
4 editions published in 2011 in English and held by 317 WorldCat member libraries worldwide
Geometric design practices for resurfacing, restoration, and rehabilitation by Hugh W McGee ( )
4 editions published in 2011 in English and held by 316 WorldCat member libraries worldwide
A comparison of AASHTO bridge load rating methods by Mark Mlynarski ( )
3 editions published in 2011 in English and held by 314 WorldCat member libraries worldwide
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.80 (from 0.00 for Report to ... to 1.00 for AASHTO str ...)
Alternative Names

controlled identity American Association of State Highway Officials

A.A.S.H.T.O.
AASHTO
American Association of State Highways and Transportation Officials
Association of State Highway and Transportation Officials
Languages
English (240)
Italian (1)
Covers