WorldCat Identities

American National Standards Institute

Overview
Works: 21 works in 23 publications in 1 language and 24 library holdings
Genres: Specifications  Drawings  Handbooks and manuals 
Roles: Other
Classifications: TK4660, 671.52
Publication Timeline
.
Most widely held works by American National Standards Institute
Complete in one volume all the IEEE standards and American national standards on electrical and electronics graphic symbols and reference designations by Institute of Electrical and Electronics Engineers( Book )

1 edition published in 1976 in English and held by 2 WorldCat member libraries worldwide

Standard symbols for welding, brazing and nondestructive examination by AWS Committee on Definitions and Symbols( )

2 editions published between 2007 and 2012 in English and held by 2 WorldCat member libraries worldwide

"This standard establishes a method for specifying certain welding, brazing, and nondestructive examination information by means of symbols. Detailed information and examples are provided for the construction and interpretation of these symbols. This system provides a means of specifying welding or brazing operations as well as nondestructive examination, including the examination method, frequency, and extent."
Guide for the visual examination of welds( )

2 editions published between 2000 and 2015 in English and held by 2 WorldCat member libraries worldwide

Enterprise-control system integration American national standard ; ANSI/ISA-95.00( Book )

in English and held by 1 WorldCat member library worldwide

Specification for zirconium and zirconium alloy welding electrodes and rods( )

1 edition published in 2005 in English and held by 1 WorldCat member library worldwide

Specification for low alloy steel electrodes and fluxes for submerged arc welding by American Welding Society( )

1 edition published in 2007 in English and held by 1 WorldCat member library worldwide

This specification provides requirements for the classification of solid and composite carbon steel and low-alloy steel electrodes and fluxes for submerged arc welding. Electrode classification is based on chemical composition of the electrode for solid electrodes, and chemical composition of the weld metal for composite electrodes. Fluxes may be classified using a multiple pass classification system or a two-run classification system, or both, under this specification. Multiple pass classification is based on the mechanical properties and the deposit composition of weld metal produced with the flux and an electrode classified herein. Two-run classification is based upon mechanical properties only. Additional requirements are included for sizes, marking, manufacturing and packaging. The form and usability of the flux are also included. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of submerged arc fluxes and electrodes. This specification makes use of both the International System of Units (SI) and U.S. Customary Units. Since these are not equivalent, each must be used independently of the other
Specification for nickel-alloy electrodes for flux cored arc welding by American Welding Society( )

1 edition published in 2013 in English and held by 1 WorldCat member library worldwide

"The composition, soundness, and properties of weld metal from ten grades of flux cored electrodes are specified. Standard electrode sizes together with their package forms and package sizes are detailed. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other."
Specification for carbon steel electrodes and rods for gas shielded arc welding by American National Standards Institute( )

1 edition published in 2005 in English and held by 1 WorldCat member library worldwide

Specification for copper and copper-alloy electrodes for shielded metal arc welding( )

1 edition published in 2008 in English and held by 1 WorldCat member library worldwide

Specification for bare stainless steel welding electrodes and rods by American Welding Society( )

1 edition published in 2006 in English and held by 1 WorldCat member library worldwide

"The classification and other requirements for more than forty-five bare stainless electrodes (solid and composite), rods, and strips are specified, including a number of duplex alloys previously unclassified."--Abstract
Specification for tungsten and oxide dispersed tungsten electrodes for arc welding and cutting by American Welding Society( )

1 edition published in 2009 in English and held by 1 WorldCat member library worldwide

"This specification prescribes the requirements for the classification of bare tungsten and oxide dispersed tungsten electrodes for arc welding and cutting and plasma arc welding and cutting. Classification is based upon the chemical composition of the electrode. Standard sizes, finish, lengths, quantities, product identification, color coding, and chemical composition limits are specified."
Specification for welding electrodes and rods for cast iron( )

1 edition published in 2016 in English and held by 1 WorldCat member library worldwide

The chemical composition requirements for electrodes and rods for welding cast iron are specifed. Copper-base rods used for braze welding of cast iron are not included. Major topics include general requirements, testing, packaging, and application guidelines
Specification for nickel and nickel alloy bare welding electrodes and rods( )

1 edition published in 2008 in English and held by 1 WorldCat member library worldwide

The chemical compositions of 51 nickel and nickel-alloy welding electrodes are rods are specified, including one composition not previously classified. Major topics include general requirements, testing, packaging, and application guidelines. This specification makes use of both the International System of Units (SI) and U.S. Customary Units. Since these are not equivalent, each must be used independently of the other
Specification for carbon and low alloy steel rods for oxyfuel gas welding by American Welding Society( )

1 edition published in 2007 in English and held by 1 WorldCat member library worldwide

"This specification prescribes the requirements for classification of carbon and low-alloy steel rods for oxyfuel gas welding. The classification requirements include the mechanical properties of the weld metal. Additional requirements are included for chemical composition of the rod and for manufacture, sizes, lengths, and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the rods. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other."
Specification for filler metals for brazing and braze welding( )

1 edition published in 2004 in English and held by 1 WorldCat member library worldwide

This specification prescribes the requirements for the classification of brazing filler metals for braze and braze welding. The chemical composition, physical form, and packaging of more than 120 brazing filler metals are specified. The brazing filler metal groups described include aluminum, cobalt, copper, gold, magnesium, nickel, silver, titanium, and brazing filler metals for vacuum service. Information is provided concerning the liquidus, the solidus, the brazing temperature range, and general areas of application recommended for each brazing filler metal. Additional requirements are included for manufacture, sizes, lengths, and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the brazing filler metals for braze and braze welding. This specification makes use of the International System of Units (SI) and U.S. Customary Units. Since these are not equivalent, each must be used independently of the other
Guidelines for information about preservation products by National Information Standards Organization (U.S.)( Book )

1 edition published in 2001 in English and held by 1 WorldCat member library worldwide

"Specifies the information that should be included in advertisments, catalogs, and promotional materials describing products used for the storage, binding, or repair of library materials, including books, pamphlets, sound recordings, videotapes, films, CDs, manuscripts, maps, and photographs."
Specification for carbon steel electrodes for flux cored arc welding : approved by American National Standards Institute, August 29, 1994 by American Welding Society( )

1 edition published in 2005 in English and held by 1 WorldCat member library worldwide

Resistance welding pocket handbook( )

1 edition published in 2011 in English and held by 1 WorldCat member library worldwide

General information relating to the operation of common resistance welding equipment
Specification for bare electrodes and rods for surfacing by American Welding Society( )

1 edition published in 2011 in English and held by 1 WorldCat member library worldwide

Specification for stainless steel electrodes for shielded metal arc welding by American Welding Society( )

1 edition published in 2006 in English and held by 1 WorldCat member library worldwide

About shielded metal arc welding, stainless electrodes, classification, classification tests, electrode identification, electrode packaging, stainless weld metal compositions, and welding
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.42 (from 0.33 for Standard s ... to 0.87 for Enterprise ...)

Alternative Names
A.N.S.I.

ANSI

Languages
English (22)