WorldCat Identities

Weiss, Volker 1930-

Overview
Works: 113 works in 340 publications in 1 language and 4,276 library holdings
Genres: Conference papers and proceedings  Handbooks and manuals 
Roles: Editor, Author, Other
Classifications: UF526.3, 620.1126
Publication Timeline
.
Most widely held works about Volker Weiss
 
Most widely held works by Volker Weiss
Properties related to fracture toughness : a symposium presented at the seventy-eighth annual meeting, American Society for Testing and Materials, Montreal, Canada, 22-27 June 1975 by Volker Weiss( Book )

9 editions published between 1976 and 2011 in English and held by 279 WorldCat member libraries worldwide

"04-605000-30. - "ASTM Special Technical Publication 605. - Electronic reproduction; W. Conshohocken, Pa; ASTM International; 2011; Mode of access: World Wide Web; System requirements: Web browser; Access may be restricted to users at subscribing institutions
Risk and failure analysis for improved performance and reliability by John J Burke( Book )

7 editions published in 1980 in English and held by 232 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center of Water­ town, Massachusetts in cooperation with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has conducted the Sagamore Army Materials Research Conference since 1954. The main purpose of these conferences has been to gather together over 150 scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. This volume, RISK AND FAILURE ANALYSIS FOR IMPROVED PERFORMANCE AND RELIABILITY, addresses the areas of Techniques of Failure Analysis, Risk and Failure Analysis for Design Against Fracture, Risk and Failure Analysis for Design Against Fatigue, Elevated Temperature Effects, Environmental Effects, Systems Approach to Production Reliability Integration and Outlook - Emerging Needs and Techniques. We wish to acknowledge the dedicated assistance of Joseph M. Bernier of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of this book is deeply appreciated
Nondestructive evaluation of materials by John J Burke( Book )

11 editions published in 1979 in English and held by 231 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center of Water­ town, Massachusetts in cooperation with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has conducted the Sagamore Army Materials Research Conference since 1954. The main purpose of these conferences has been to gather together over 150 scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. This volume NONDESTRUCTIVE EVALUATION OF MATERIALS, addresses the areas of x-ray, ultrasonics and other methods of nondestructive testing. We wish to acknowledge the dedicated assistance of Joseph M. Bernier of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of this book. Their help is deeply appreciated. Syracuse University Syracuse, New York The Editors Contents SESSION I X-RAY S. Heissman, Moderator H. K. Herglotz, Moderator 1. Overview of X-Ray Diffraction Methods for Nondestructive Testing • • • • • • • ••• 1 L. V. Azaroff 2. Detection of Fatigue Damage by X-Rays 21 S. Taira and K. Kamachi 3. A Historical Example of Fatigue Damage • • • • • • • 55 H. K. Herglotz 4. The Application of X-Ray Topography to Materials Science . . . . . . . . . . . . . . . . . . . . 69 S. Weissman 5
Residual stress and stress relaxation by Sagamore Army Materials Research Conference( Book )

8 editions published in 1982 in English and held by 214 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center in coop­ eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings, entitled RESIDUAL STRESS AND STRESS RELAXATION, address the nature of residual stresses and their measurements, the sources of residual stress, stress relaxation, sub-critical crack growth in the presence of residual stress, residual stresses and properties, and research in progress. We wish to acknowledge the assistance of Mr. Dan McNaught of the Army Materials and Mechanics Research Center and Mr. Robert J. Sell and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of the book. The continued active interest and support of these conferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated
Surface treatments for improved performance and properties by John J Burke( Book )

10 editions published in 1982 in English and held by 200 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center in coop­ eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together over 150 scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings, entitled SURFACE TREATMENTS FOR IM­ PROVED PERFORMANCE AND PROPERTIES, address the Physical and Chemical Characteristics of Surfaces, Emerging Surface Modi­ fication Techniques, Surface Structure and Mechanical Proper­ ties, and Relationships between Properties and Processing for Non-metric Materials. We wish to acknowledge the dedicated assistance of JoseDh M. Bernier of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of this book. The continued active interest and support of these con­ ferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii CONTENTS SESSION I 1. Surface Modification for Improved Properties. . . . . . .. 3 P. A. Parrish SESSION II PHYSICAL AND CHEMICAL CHARACTERISTICS OF SURFACES P. Ficalora, Moderator 2. Characterization of Surfaces. 19 H. K. Herglotz 3. Reaction Kinetics 51 J. B. Hudson 4. Surfac e Treatments for Enhanced Bonding Between Inorganic Surfaces and Polymers ........
Material behavior under high stress and ultrahigh loading rates by Sagamore Army Materials Research Conference( Book )

9 editions published in 1983 in English and held by 200 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center in coopera­ tion with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry, and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army, and the scientific community. The proceedings of this conference, entitled MATERIAL BEHAVIOR UNDER HIGH STRESS AND ULTRAHIGH LOADING RATES, will be published in two parts. The topics covered in the present volume include dynamic plasticity, adiabatic shear/localized deformation, and dynamic fracture mechanics. Papers dealing with ordnance applica­ tions, projectile launch environment, and recent work-in-progress will appear as an AMMRC Technical Report and will have more limited distribution in accordance with recent Army guidelines. The Conference Chairmen are particularly grateful to the members of the Program Committee. We wish also to acknowledge the assistance of Mr. Charles Polley of the Army Materials and Mechanics Research Center, Mr. Robert Sell, Ms. Helen Brown DeMascio, and Ms. Mary Ann Holmquist of Syracuse University throughout the con­ ference planning stages and the publication of the text. The continued active interest in and support of these confer­ ences by Dr. E. Wright and Col. George Sibert, Direct and Deputy Director/Commander, respectively, of the Army Materials and Mechan­ ics Research Center, is appreciated
Innovations in materials processing by Gordon Bruggeman( Book )

9 editions published in 1985 in English and held by 199 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center in cooperation with the Office of Sponsored Programs of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conferences since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry and government to explore in depth a subject of importance to the Department of Defense, the Army, and the scientific community. This 30th Sagamore Conference, entitled Innovations in Materials Processing, has attempted to focus on the inter­ disciplinary nature of materials processing, looking at recent advancements in the development of unit processes from a range of standpoints from the understanding and control of the under­ lying mechanisms through their application as part of a manufactur­ ing sequence. In between, the classic link between processing and materials properties is firmly established. A broad range of materials are treated in this manner: metals, ceramics, plastics, and composites. The interdisciplinary nature of materials processing exists through its involvement with the basic sciences, with, process and product design, with process control, and ultimately with manufacturing engineering. Materials processing is interdisciplinary in another sense, through its application within all materials disciplines. The industrial community (and the Army as its customer) is becoming increasingly concerned with producibility/reliability/ affordability issues in advanced product development. These concerns will be adequately addressed only by employing the full range of disciplines encompassed within the field of materials processing
Fatigue, environment and temperature effects by John J Burke( Book )

9 editions published between 1982 and 2013 in English and held by 198 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center in coop­ eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University has been conducting the Annual Sagamore Army Materials Research Conference since 1954. The specific purpose of these conferences has been to bring together scientists and engineers from academic institutions, industry and government who are uniquely qualified to explore in depth a subject of importance to the Department of Defense, the Army and the scientific community. These proceedings entitled, FATIGUE - ENVIRONMENT AND TEMPER­ ATURE EFFECT, address the overview of temperature and environmental effects of fatigue, room temperature environmental effects, high temperature and environmental effect - mechanisms, high tempera­ ture and environmental effect - mechanisms, materials and design-engineering applications. We wish to acknowledge the assistance of Messrs. Joseph Bernier and Dan McNaught of the Army Materials and Mechanics Research Center and Helen Brown DeMascio of Syracuse University throughout the stages of the conference planning and finally the publication of the book. The continued active interest and support of these conferences by Dr. E. Wright, Director of the Army Materials and Mechanics Research Center, is appreciated
Advances in metal processing by John J Burke( Book )

5 editions published in 1981 in English and held by 195 WorldCat member libraries worldwide

Application of fracture mechanics to design by Sagamore Army Materials Research Conference( Book )

9 editions published between 1978 and 1979 in English and held by 181 WorldCat member libraries worldwide

Shock waves and the mechanical properties of solids; proceedings by Sagamore Army Materials Research Conference( Book )

3 editions published in 1971 in English and held by 165 WorldCat member libraries worldwide

Surfaces and interfaces II : physical and mechanical properties : held at Sagamore Conference Center, Raquette Lake, New York, August 22-25, 1967 by John J Burke( Book )

12 editions published between 1963 and 1968 in English and held by 153 WorldCat member libraries worldwide

The Army Materials and Mechanics Research Center has conducted the Sagamore Army Materials Research Conferences, in cooperation with the Metallurgical Research Laboratories of the Department of Chemical Engineering and Metallurgy of Syracuse University, since 1954. The purpose of the conferences has been to gather together scientists and engineers from academic institutions, industry, and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific corr.munity. This volume, Surfaces and Interfaces ll: Physical and Mechanical Properties, can be considered a continuation, or perhaps an extension, of the information contained in Surfaces and Interfaces I: Chemical and Physical Characteristics. The emphasis in this volume is focused on: the technological significance of surfaces and interfaces; surface­ sensitive mechanical properties; environment-sensitive properties; control of grain structure; and composite materials. It is felt that the rather ambitious undertaking of the program committee to place the role of "surfaces and interfaces" in its proper context has been achieved. The balance between basic research findings and more applied research allows the reader a certain degree of latitude in the use of the two volumes. The continued active interest and support of these conferences by Col. C. T. Riordan, Commanding Officer, Dr. E. Scala, Technical Di­ rector, and J. F. Sullivan, Deputy Technical Director, of the Army Materials and Mechanics Research Center is appreciated
Strengthening mechanisms : metals and ceramics by Sagamore Army Materials Research Conference( Book )

13 editions published in 1966 in English and held by 146 WorldCat member libraries worldwide

Powder metallurgy for high-performance applications; proceedings by Sagamore Army Materials Research Conference( Book )

2 editions published in 1972 in English and held by 140 WorldCat member libraries worldwide

Materials characterization for systems performance and reliability by Sagamore Army Materials Research Conference( Book )

5 editions published between 1985 and 1986 in English and held by 124 WorldCat member libraries worldwide

Ultrafine-grain ceramics; proceedings by Sagamore Army Materials Research Conference( Book )

1 edition published in 1970 in English and held by 116 WorldCat member libraries worldwide

Block and graft copolymers; proceedings by Sagamore Army Materials Research Conference( Book )

2 editions published in 1973 in English and held by 110 WorldCat member libraries worldwide

Ultrafine-grain metals; proceedings by Sagamore Army Materials Research Conference( Book )

2 editions published in 1970 in English and held by 102 WorldCat member libraries worldwide

Aerospace structural metals handbook. Directorate of Materials and Processes, Aeronautical Systems Division, Air Force Command, Wright Patterson Air Force Base, Ohio by Syracuse University( Book )

19 editions published between 1962 and 1968 in English and Undetermined and held by 100 WorldCat member libraries worldwide

The "Aerospace Structural Metals Handbook', with the insertion of the first, second, third and fourth revision supplements (Supplements 1, 2, 3, and 4), now contains physical, chemical and mechanical property information on 180 metals and alloys of interest for aerospace structural applications. The present Handbook consists of three volumes: Volume 1: Ferrous Alloys, Volume 2: Non-Ferrous, Light Metal Alloys, Volume 2A: Non-Ferrous, Heat Resistant Alloys. The Handbook also contains data source references, a general discussion of properties, a glossary of terms, a discussion of fracture toughness and a cross-index of the alloys contained herein
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.62 (from 0.54 for Powder met ... to 1.00 for Volker Wei ...)

Residual stress and stress relaxation
Covers
Fatigue, environment and temperature effects
Alternative Names
Weiss, V. 1930-

Weiss, V. (Volker), 1930-

Вайс Ф.

Languages
English (153)