WorldCat Identities

Froes, F. H.

Overview
Works: 74 works in 249 publications in 3 languages and 4,349 library holdings
Genres: Conference papers and proceedings 
Roles: Editor, Author, Other
Classifications: TS247, 669.94
Publication Timeline
.
Most widely held works by F. H Froes
Processing of structural metals by rapid solidification : proceedings of a seven session symposium on enhanced properties in structural metals via rapid solidification by Symposium on Enhanced properties in structural metals via rapid solidification( Book )

8 editions published in 1987 in English and Undetermined and held by 130 WorldCat member libraries worldwide

Structural applications of mechanical alloying : proceedings of an ASM International conference, Myrtle Beach, South Carolina, 27-29 March 1990 by S.C.) ASM International Conference on Structural Applications of Mechanical Alloying$ (1990 : Myrtle Beach( Book )

10 editions published between 1990 and 1994 in English and held by 83 WorldCat member libraries worldwide

Powder metallurgy of titanium alloys : proceedings of a symposium by metallurgical and petroleum engineers American institute of mining( Book )

6 editions published in 1980 in English and Undetermined and held by 79 WorldCat member libraries worldwide

Development of low density titanium alloys for structural applications : final report( Book )

1 edition published in 1996 in English and held by 77 WorldCat member libraries worldwide

High integrity castings : proceedings of the Conference on Advances in High Integrity Castings, held in conjunction with the 1988 World Materials Congress, Chicago, Illinois, USA, 24-30 September 1988 by Conference on Advances in High Integrity Castings( Book )

7 editions published in 1988 in English and held by 73 WorldCat member libraries worldwide

The proceedings of the 1988 World Materials Congress were published by ASM and consists of the following volumes: Microalloyed HSLA Steels Conference Proceedings, Inclusions and Their Influence on Material Behavior, High Integrity Castings, Precipitation Phenomena: Deformation and Aging, Wear Resistance of Metals and Alloys, Electronic Materials and Processing, Corrosion-Resistant Automotive Sheet Steels, Cast Reinforced Metal Composites. (JES)
Titanium net shape technologies : proceedings of a symposium( Book )

4 editions published in 1984 in English and held by 69 WorldCat member libraries worldwide

Advanced materials : meeting the economic challenge : 24th International SAMPE Technical Conference : Westin Harbour Castle Hotel, Toronto, Canada, October 20-22, 1992 by International SAMPE Technical Conference( Book )

3 editions published in 1992 in English and held by 68 WorldCat member libraries worldwide

Titanium technology : present status and future trends( Book )

2 editions published in 1985 in English and held by 63 WorldCat member libraries worldwide

Hot isostatic pressing : proceedings of the International Conference on Hot Isostatic Pressing, 20-22 May 1996, Andover, Massachusetts by International Conference on Hot Isostatic Pressing( Book )

6 editions published in 1996 in English and held by 58 WorldCat member libraries worldwide

Recent advances in titanium metal matrix composites : proceedings of a symposium held during Materials Week, October 2-6, 1994, in Rosemont, Illinois( Book )

4 editions published in 1995 in English and held by 48 WorldCat member libraries worldwide

Titanium powder metallurgy : science, technology, and applications by Ma Qian( Book )

15 editions published in 2015 in English and held by 44 WorldCat member libraries worldwide

This book contains comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all aspects of titanium powder metallurgy, including: powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. --
Cost-affordable titanium III : selected, peer reviewed papers from the TMS 2010 spring Symposium on "Cost-affordable Titanium III" by Symposium on "Cost-affordable Titanium"( Book )

7 editions published in 2010 in English and held by 27 WorldCat member libraries worldwide

The main purpose of this special collection was to gather together up-to-date knowledge from scientists, researchers and technologists in order to review the status of processing technologies, materials development, emerging applications and economics/affordability issues. The resultant scope is necessarily broad: contributors who are involved in titanium production technology, vapor, solid and liquid titanium processing/post-processing, alloy development, microstructure/property enhancement, modeling and simulation, and applications and market development were invited to participate. The diverse mix of papers presented here reflects the breadth of activity aimed at the cost-affordable use of titanium in emerging applications. The editors' opening overview paper attempts to present the broad sweep of present and projected titanium cost-reduction schemes; in both titanium production and in subsequent processing. What is made particularly clear is that the impetus, in broadening markets, for titanium is very dependent upon cost reduction; particularly in cost-sensitive industries such as automobile production. The papers are grouped into several main chapters: Overview and Low Cost Processing, Low Cost Materials and Processing, Powder Consolidation and Properties I, Powder Consolidation and Properties II, Creative Processing and Property Enhancement I and Creative Processing and Property Enhancement II. Overall, this constitutes an exhaustive and unique survey of the topic. This collection of 24 selected, peer-reviewed papers were originally presented during the TMS 2010 spring symposium on Cost-Affordable Titanium III. The papers are divided into six chapters that represent how the symposium was organized: overview and low-cost processing, low-cost materials and processing, powder consolidation and properties I and II, and creating processing I and II. Editors are Imam (Naval Research Laboratory), Froes (U. of Idaho), and Dring (Norsk Titanium)
High performance metallic materials for cost sensitive applications : proceedings of a symposium sponsored by the Structural Materials Committee and the Titanium Committee of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) held during the TMS 2002 annual meeting in Seattle, Washington, February 17-21, 2002 by F. H Froes( Book )

10 editions published between 2002 and 2013 in English and held by 25 WorldCat member libraries worldwide

These proceedings examine the most recent advances and best practices in structural materials selection, design, and manufacturing for producing affordable components, with a focus on titanium, aluminum, and other advanced metallic materials. This volume discusses melting, casting, powder metallurgy, forging, forming, extrusion, and machining, as well as processing advances, innovative processing techniques, process modeling and materials by design, and new alloys, as well as related processing-microstructure-properties-performance-cost studies. This book can be purchased either on CD-ROM, or
Additive manufacturing of titanium alloys : state of the art, challenges and opportunities by Bhaskar Dutta( Book )

8 editions published in 2016 in English and held by 22 WorldCat member libraries worldwide

Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry
Titanium : physical metallurgy, processing, and applications by F. H Froes( Book )

7 editions published in 2015 in English and Undetermined and held by 8 WorldCat member libraries worldwide

This new book covers all aspects of the history, physical metallurgy, corrosion behavior, cost factors and current and potential uses of titanium. The history of titanium is traced from its early beginnings through the work of Kroll, to the present day broadening market place. Extensive detail on extraction processes is discussed, as well as the various beta to alpha transformations and details of the powder metallurgy techniques. The relationship of microstructure to mechanical properties, and the topic of corrosion are described in detail. A comprehensive section presents applications of titanium. Anyone involved in any aspect of titanium science, technology, or application (including personnel in industry, government, and academia) can benefit from this book. This reference book, based on an education course developed by ASM International in the early 1980's, was revised several times as new technical information became available, the latest revision in 2014 by F.H. (Sam) Froes, an expert in titanium and titanium alloy technology
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.63 (from 0.09 for Cost-affor ... to 0.73 for Developmen ...)

Non-aerospace applications of titanium : proceedings of the symposium sponsored by the Structural Materials Division of the Minerals, Metals & Materials Society, presented at the 1998 TMS Annual Meeting in San Antonio, Texas, on February 16-19, 1998
Alternative Names
Froes, F. S.

Froes, Francis H.

Froes, Sam.

Frous, F. H.

Languages
English (130)

German (1)

Italian (1)

Covers
Development in light metals : science, technology and applications : proceedings of the International Conference on Development in Light Metals, organized by United Engineering Foundation, Inc., New York, Il Ciocco Confererence Center, Italy, September 19-24, 1999Innovations in titanium technology : proceedings of a symposia [sic] [presented at the] TMS 2007 Annual Meeting & Exhibition, Orlando, Florida, USA, February 25-March 1, 2007Cost-affordable titanium III : selected, peer reviewed papers from the TMS 2010 spring Symposium on "Cost-affordable Titanium III"High performance metallic materials for cost sensitive applications : proceedings of a symposium sponsored by the Structural Materials Committee and the Titanium Committee of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) held during the TMS 2002 annual meeting in Seattle, Washington, February 17-21, 2002