Reddy, J. N. (Junuthula Narasimha) 1945
Overview
Works:  107 works in 629 publications in 5 languages and 11,769 library holdings 

Genres:  Textbooks 
Roles:  Author, Editor, Other, Thesis advisor, Honoree 
Publication Timeline
.
Most widely held works by
J. N Reddy
Shear deformable beams and plates : relationships with classical solutions by
C. M Wang(
)
17 editions published in 2000 in English and held by 1,682 WorldCat member libraries worldwide
Most books on the theory and analysis of beams and plates deal with the classical (EulerBernoulli/Kirchoff) theories but few include shear deformation theories in detail. The classical beam/plate theory is not adequate in providing accurate bending, buckling, and vibration results when the thicknesstolength ratio of the beam/plate is relatively large. This is because the effect of transverse shear strains, neglected in the classical theory, becomes significant in deep beams and thick plates. This book illustrates how shear deformation theories provide accurate solutions compared to the classical theory. Equations governing shear deformation theories are typically more complicated than those of the classical theory. Hence it is desirable to have exact relationships between solutions of the classical theory and shear deformation theories so that whenever classical theory solutions are available, the corresponding solutions of shear deformation theories can be readily obtained. Such relationships not only furnish benchmark solutions of shear deformation theories but also provide insight into the significance of shear deformation on the response. The relationships for beams and plates have been developed by many authors over the last several years. The goal of this monograph is to bring together these relationships for beams and plates in a single volume. The book is divided into two parts. Following the introduction, Part 1 consists of Chapters 2 to 5 dealing with beams, and Part 2 consists of Chapters 6 to 13 covering plates. Problems are included at the end of each chapter to use, extend, and develop new relationships
17 editions published in 2000 in English and held by 1,682 WorldCat member libraries worldwide
Most books on the theory and analysis of beams and plates deal with the classical (EulerBernoulli/Kirchoff) theories but few include shear deformation theories in detail. The classical beam/plate theory is not adequate in providing accurate bending, buckling, and vibration results when the thicknesstolength ratio of the beam/plate is relatively large. This is because the effect of transverse shear strains, neglected in the classical theory, becomes significant in deep beams and thick plates. This book illustrates how shear deformation theories provide accurate solutions compared to the classical theory. Equations governing shear deformation theories are typically more complicated than those of the classical theory. Hence it is desirable to have exact relationships between solutions of the classical theory and shear deformation theories so that whenever classical theory solutions are available, the corresponding solutions of shear deformation theories can be readily obtained. Such relationships not only furnish benchmark solutions of shear deformation theories but also provide insight into the significance of shear deformation on the response. The relationships for beams and plates have been developed by many authors over the last several years. The goal of this monograph is to bring together these relationships for beams and plates in a single volume. The book is divided into two parts. Following the introduction, Part 1 consists of Chapters 2 to 5 dealing with beams, and Part 2 consists of Chapters 6 to 13 covering plates. Problems are included at the end of each chapter to use, extend, and develop new relationships
An introduction to the finite element method by
J. N Reddy(
Book
)
63 editions published between 1980 and 2018 in English and Italian and held by 907 WorldCat member libraries worldwide
"J.N. Reddy's, An Introduction to the Finite Element Method, third edition is an update of one of the most popular FEM textbooks available. The book retains its strong conceptual approach, clearly examining the mathematical underpinnings of FEM, and providing a general approach of engineering application areas. Known for its detailed, carefully selected example problems and extensive selection of homework problems, the author has comprehensively covered a wide range of engineering areas making the book approriate for all engineering majors, and underscores the wide range of use FEM has in the professional world. A supplementary text Web site located at http://www.mhhe.com/reddy3e contains passwordprotected solutions to endofchapter problems, general textbook information, supplementary chapters on the FEM1D and FEM2D computer programs, and more!"Publisher's description
63 editions published between 1980 and 2018 in English and Italian and held by 907 WorldCat member libraries worldwide
"J.N. Reddy's, An Introduction to the Finite Element Method, third edition is an update of one of the most popular FEM textbooks available. The book retains its strong conceptual approach, clearly examining the mathematical underpinnings of FEM, and providing a general approach of engineering application areas. Known for its detailed, carefully selected example problems and extensive selection of homework problems, the author has comprehensively covered a wide range of engineering areas making the book approriate for all engineering majors, and underscores the wide range of use FEM has in the professional world. A supplementary text Web site located at http://www.mhhe.com/reddy3e contains passwordprotected solutions to endofchapter problems, general textbook information, supplementary chapters on the FEM1D and FEM2D computer programs, and more!"Publisher's description
The finite element method in heat transfer and fluid dynamics by
J. N Reddy(
Book
)
32 editions published between 1994 and 2010 in English and held by 805 WorldCat member libraries worldwide
32 editions published between 1994 and 2010 in English and held by 805 WorldCat member libraries worldwide
An introduction to nonlinear finite element analysis by
J. N Reddy(
)
26 editions published between 2004 and 2010 in English and held by 699 WorldCat member libraries worldwide
"This book presents the theory and computer implementation of the finite element method as applied to nonlinear problems of heat transfer and similar field problems, fluid mechanics  flows of incompressible fluids  and solid mechanics  elasticity, beams, plates and shells. Both geometric as well as material nonlinearities are considered, and static and transient (i.e. time dependent) responses are studied. Detailed theoretical formulations and computer implementation steps, as well as numerical examples for the user to verify and validate selfcreated computer programs, give the reader a clear understanding of the concepts of nonlinear finite element analyses and allow greater confidence in the formulation and computer implementation of nonlinear equations across many fields of science and engineering. At the same time, the book serves as a prelude to more advanced books on the subject. It will be a useful textbook for graduate students of engineering  in particular, aerospace, civil and mechanical  and applied mathematics, but also a good reference for engineers and scientists working in industry, especially those in the aerospace and automobile industries."Jacket
26 editions published between 2004 and 2010 in English and held by 699 WorldCat member libraries worldwide
"This book presents the theory and computer implementation of the finite element method as applied to nonlinear problems of heat transfer and similar field problems, fluid mechanics  flows of incompressible fluids  and solid mechanics  elasticity, beams, plates and shells. Both geometric as well as material nonlinearities are considered, and static and transient (i.e. time dependent) responses are studied. Detailed theoretical formulations and computer implementation steps, as well as numerical examples for the user to verify and validate selfcreated computer programs, give the reader a clear understanding of the concepts of nonlinear finite element analyses and allow greater confidence in the formulation and computer implementation of nonlinear equations across many fields of science and engineering. At the same time, the book serves as a prelude to more advanced books on the subject. It will be a useful textbook for graduate students of engineering  in particular, aerospace, civil and mechanical  and applied mathematics, but also a good reference for engineers and scientists working in industry, especially those in the aerospace and automobile industries."Jacket
Variational methods in theoretical mechanics by
J. Tinsley Oden(
Book
)
35 editions published between 1976 and 1998 in 4 languages and held by 684 WorldCat member libraries worldwide
This is a textbook written for use in a graduatelevel course for students of mechanics and engineering science. It is designed to cover the essential features of modern variational methods and to demonstrate how a number of basic mathematical concepts can be used to produce a unified theory of variational mechanics. As prerequisite to using this text, we assume that the student is equipped with an introductory course in functional analysis at a level roughly equal to that covered, for example, in Kolmogorov and Fomin (Functional Analysis, Vol. I, Graylock, Rochester, 1957) and possibly a graduatelevel course in continuum mechanics. Numerous references to supplementary material are listed throughout the book. We are indebted to Professor Jim Douglas of the University of Chicago, who read an earlier version of the manuscript and whose detailed suggestions were extremely helpful in preparing the final draft. We also gratefully acknowedge that much of our own research work on va ri at i ona 1 theory was supported by the U.S. Ai r Force Offi ce of Scientific Research. We are indebted to Mr. MingGoei Sheu for help in proofreading. Finally, we wish to express thanks to Mrs. Marilyn Gude for her excellent and painstaking job of typing the manuscript. This revised edition contains only minor revisions of the first. Some misprints and errors have been corrected, and some sections were deleted, which were felt to be out of date
35 editions published between 1976 and 1998 in 4 languages and held by 684 WorldCat member libraries worldwide
This is a textbook written for use in a graduatelevel course for students of mechanics and engineering science. It is designed to cover the essential features of modern variational methods and to demonstrate how a number of basic mathematical concepts can be used to produce a unified theory of variational mechanics. As prerequisite to using this text, we assume that the student is equipped with an introductory course in functional analysis at a level roughly equal to that covered, for example, in Kolmogorov and Fomin (Functional Analysis, Vol. I, Graylock, Rochester, 1957) and possibly a graduatelevel course in continuum mechanics. Numerous references to supplementary material are listed throughout the book. We are indebted to Professor Jim Douglas of the University of Chicago, who read an earlier version of the manuscript and whose detailed suggestions were extremely helpful in preparing the final draft. We also gratefully acknowedge that much of our own research work on va ri at i ona 1 theory was supported by the U.S. Ai r Force Offi ce of Scientific Research. We are indebted to Mr. MingGoei Sheu for help in proofreading. Finally, we wish to express thanks to Mrs. Marilyn Gude for her excellent and painstaking job of typing the manuscript. This revised edition contains only minor revisions of the first. Some misprints and errors have been corrected, and some sections were deleted, which were felt to be out of date
An introduction to the mathematical theory of finite elements by
J. Tinsley Oden(
Book
)
24 editions published between 1976 and 2011 in English and Undetermined and held by 593 WorldCat member libraries worldwide
This introduction to the basic mathematical theory of the finite element method is geared toward readers with limited mathematical backgrounds. Its coherent demonstrations explain the use of these techniques in developing the theory of finite elements, with detailed proofs of the major theorems and numerous examples. 1976 edition
24 editions published between 1976 and 2011 in English and Undetermined and held by 593 WorldCat member libraries worldwide
This introduction to the basic mathematical theory of the finite element method is geared toward readers with limited mathematical backgrounds. Its coherent demonstrations explain the use of these techniques in developing the theory of finite elements, with detailed proofs of the major theorems and numerous examples. 1976 edition
An introduction to continuum mechanics : with applications by
J. N Reddy(
Book
)
32 editions published between 2006 and 2013 in English and held by 485 WorldCat member libraries worldwide
This text introduces the main concepts of continuum mechanics simply with rich supporting examples but does not compromise mathematically in providing the invariant form as well as component form of the basic equations and their applications to problems in elasticity, fluid mechanics, and heat transfer. The book is ideal for advanced undergraduate and beginning graduate students
32 editions published between 2006 and 2013 in English and held by 485 WorldCat member libraries worldwide
This text introduces the main concepts of continuum mechanics simply with rich supporting examples but does not compromise mathematically in providing the invariant form as well as component form of the basic equations and their applications to problems in elasticity, fluid mechanics, and heat transfer. The book is ideal for advanced undergraduate and beginning graduate students
Applied functional analysis and variational methods in engineering by
J. N Reddy(
Book
)
25 editions published between 1986 and 1991 in English and held by 351 WorldCat member libraries worldwide
25 editions published between 1986 and 1991 in English and held by 351 WorldCat member libraries worldwide
Energy and variational methods in applied mechanics : with an introduction to the finite element method by
J. N Reddy(
Book
)
15 editions published in 1984 in English and held by 323 WorldCat member libraries worldwide
15 editions published in 1984 in English and held by 323 WorldCat member libraries worldwide
Exact solutions for buckling of structural members by
C. M Wang(
Book
)
14 editions published between 2004 and 2005 in English and held by 316 WorldCat member libraries worldwide
"This book condenses closedform buckling solutions of columns, beams, arches, rings, plates, and shells from the vast literature into a single volume, it begins with an introduction to elastic buckling and the importance of elastic buckling load. The following chapters present coverage of flexural buckling solutions for columns under various loads, restraints, and boundary conditions; the exact flexuraltorsional buckling solutions of beams; and the buckling solutions of circular arches and rings. Also included in these chapters are discussions of the effect of transverse shear deformation on the bucking load of columns and the flexuraltorsional buckling of columns for thinwalled members with open profiles. The final chapters discuss the elastic buckling of plates under inplane loads and buckling solutions for cylindrical and spherical shells." "With coverage of a wide range of buckling load problems, this reference provides engineers and researchers benchmarks for assessing the validity, convergence, and accuracy of solutions obtained by numerical methods."Jacket
14 editions published between 2004 and 2005 in English and held by 316 WorldCat member libraries worldwide
"This book condenses closedform buckling solutions of columns, beams, arches, rings, plates, and shells from the vast literature into a single volume, it begins with an introduction to elastic buckling and the importance of elastic buckling load. The following chapters present coverage of flexural buckling solutions for columns under various loads, restraints, and boundary conditions; the exact flexuraltorsional buckling solutions of beams; and the buckling solutions of circular arches and rings. Also included in these chapters are discussions of the effect of transverse shear deformation on the bucking load of columns and the flexuraltorsional buckling of columns for thinwalled members with open profiles. The final chapters discuss the elastic buckling of plates under inplane loads and buckling solutions for cylindrical and spherical shells." "With coverage of a wide range of buckling load problems, this reference provides engineers and researchers benchmarks for assessing the validity, convergence, and accuracy of solutions obtained by numerical methods."Jacket
Advanced engineering analysis by
J. N Reddy(
Book
)
17 editions published between 1982 and 1990 in 3 languages and held by 308 WorldCat member libraries worldwide
17 editions published between 1982 and 1990 in 3 languages and held by 308 WorldCat member libraries worldwide
Mechanics of laminated composite plates and shells : theory and analysis by
J. N Reddy(
Book
)
14 editions published between 2003 and 2004 in English and held by 298 WorldCat member libraries worldwide
The use of composite materials in engineering structures continues to increase dramatically, and in the seven years since the first edition of this book appeared, advances in materials modeling in general and composite materials and structures in particular have been just as significant. To reflect these developments, renowned author, educator, and researcher J.N. Reddy has thoroughly revised, updated, and enhanced his standardsetting Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. New in the Second Edition: A new chapter dedicated to the theory and analysis of laminated shells New discussions addressing smart structures and functionally graded materials Thorough updates to all chapters and a reorganization of chapters that improves the clarity of the presentation Additional exercises and examplesNo other book is as up to date. No other book approaches the subject primarily from the finite element method. And no other book provides such full, selfcontained coverage of the theories, analytical solutions, and linear and nonlinear finite element models of plate and shell laminated composite structures
14 editions published between 2003 and 2004 in English and held by 298 WorldCat member libraries worldwide
The use of composite materials in engineering structures continues to increase dramatically, and in the seven years since the first edition of this book appeared, advances in materials modeling in general and composite materials and structures in particular have been just as significant. To reflect these developments, renowned author, educator, and researcher J.N. Reddy has thoroughly revised, updated, and enhanced his standardsetting Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. New in the Second Edition: A new chapter dedicated to the theory and analysis of laminated shells New discussions addressing smart structures and functionally graded materials Thorough updates to all chapters and a reorganization of chapters that improves the clarity of the presentation Additional exercises and examplesNo other book is as up to date. No other book approaches the subject primarily from the finite element method. And no other book provides such full, selfcontained coverage of the theories, analytical solutions, and linear and nonlinear finite element models of plate and shell laminated composite structures
Design of Shape Memory Alloy (SMA) Actuators by
Ashwin Rao(
)
8 editions published in 2015 in English and held by 259 WorldCat member libraries worldwide
This short monograph presents an analysis and design methodology for shape memory alloy (SMA) components such as wires, beams, and springs for different applications. The solidsolid, diffusionless phase transformations in thermally responsive SMA allows them to demonstrate unique characteristics like superelasticity and shape memory effects. The combined sensing and actuating capabilities of such materials allows them to provide a system level response by combining multiple functions in a single material system. In SMA, the combined mechanical and thermal loading effects influence the functionality of such materials. The aim of this book is to make the analysis of these materials accessible to designers by developing a "strength of materials" approach to the analysis and design of such SMA components inspired from their various applications with a review of various factors influencing the design process for such materials
8 editions published in 2015 in English and held by 259 WorldCat member libraries worldwide
This short monograph presents an analysis and design methodology for shape memory alloy (SMA) components such as wires, beams, and springs for different applications. The solidsolid, diffusionless phase transformations in thermally responsive SMA allows them to demonstrate unique characteristics like superelasticity and shape memory effects. The combined sensing and actuating capabilities of such materials allows them to provide a system level response by combining multiple functions in a single material system. In SMA, the combined mechanical and thermal loading effects influence the functionality of such materials. The aim of this book is to make the analysis of these materials accessible to designers by developing a "strength of materials" approach to the analysis and design of such SMA components inspired from their various applications with a review of various factors influencing the design process for such materials
Energy principles and variational methods in applied mechanics by
J. N Reddy(
Book
)
18 editions published between 2002 and 2017 in English and held by 250 WorldCat member libraries worldwide
"A systematic presentation of energy principles and variational methods The increasing use of numerical and computational methods in engineering and applied sciences has shed new light on the importance of energy principles and variational methods. Energy Principles and Variational Methods in Applied Mechanics provides a systematic and practical introduction to the use of energy principles, traditional variational methods, and the finite element method to the solution of engineering problems involving bars, beams, torsion, plane elasticity, and plates. Beginning with a review of the basic equations of mechanics and the concepts of work, energy, and topics from variational calculus, this book presents the virtual work and energy principles, energy methods of solid and structural mechanics, Hamilton's principle for dynamical systems, and classical variational methods of approximation. A unified approach, more general than that found in most solid mechanics books, is used to introduce the finite element method. Also discussed are applications to beams and plates. Complete with more than 200 illustrations and tables, Energy Principles and Variational Methods in Applied Mechanics, Second Edition is a valuable book for students of aerospace, civil, mechanical, and applied mechanics; and engineers in design and analysis groups in the aircraft, automobile, and civil engineering structures, as well as shipbuilding industries."Publisher's website
18 editions published between 2002 and 2017 in English and held by 250 WorldCat member libraries worldwide
"A systematic presentation of energy principles and variational methods The increasing use of numerical and computational methods in engineering and applied sciences has shed new light on the importance of energy principles and variational methods. Energy Principles and Variational Methods in Applied Mechanics provides a systematic and practical introduction to the use of energy principles, traditional variational methods, and the finite element method to the solution of engineering problems involving bars, beams, torsion, plane elasticity, and plates. Beginning with a review of the basic equations of mechanics and the concepts of work, energy, and topics from variational calculus, this book presents the virtual work and energy principles, energy methods of solid and structural mechanics, Hamilton's principle for dynamical systems, and classical variational methods of approximation. A unified approach, more general than that found in most solid mechanics books, is used to introduce the finite element method. Also discussed are applications to beams and plates. Complete with more than 200 illustrations and tables, Energy Principles and Variational Methods in Applied Mechanics, Second Edition is a valuable book for students of aerospace, civil, mechanical, and applied mechanics; and engineers in design and analysis groups in the aircraft, automobile, and civil engineering structures, as well as shipbuilding industries."Publisher's website
Finite element analysis of composite laminates by
O. O Ochoa(
Book
)
14 editions published between 1992 and 2011 in English and held by 238 WorldCat member libraries worldwide
Composite materials are increasingly used in aerospace, underwater, and automotive structures. To take advantage of the full potential of composite materials, structural analysts and designers must have accurate mathematical models and design methods at their disposal. The objective of this monograph is to present the laminated plate theories and their finite element models to study the deformation, strength and failure of composite structures. Emphasis is placed on engineering aspects, such as the analytical descriptions, effective analysis tools, modeling of physical features, and evaluation of approaches used to formulate and predict the response of composite structures. The first chapter presents an overview of the text. Chapter 2 is devoted to the introduction of the definitions and terminology used in composite materials and structures. Anisotropic constitutive relations and Iaminate plate theories are also reviewed. Finite element models of laminated composite plates are presented in Chapter 3. Numerical evaluation of element coefficient matrices, postcomputation of strains and stresses, and sample examples of laminated plates in bending and vibration are discussed. Chapter 4 introduces damage and failure criteria in composite laminates. Finally, Chapter 5 is dedicated to case studies involving various aspects and types of composite structures. Joints, cutouts, woven composites, environmental effects, postbuckling response and failure of composite laminates are discussed by considering specific examples
14 editions published between 1992 and 2011 in English and held by 238 WorldCat member libraries worldwide
Composite materials are increasingly used in aerospace, underwater, and automotive structures. To take advantage of the full potential of composite materials, structural analysts and designers must have accurate mathematical models and design methods at their disposal. The objective of this monograph is to present the laminated plate theories and their finite element models to study the deformation, strength and failure of composite structures. Emphasis is placed on engineering aspects, such as the analytical descriptions, effective analysis tools, modeling of physical features, and evaluation of approaches used to formulate and predict the response of composite structures. The first chapter presents an overview of the text. Chapter 2 is devoted to the introduction of the definitions and terminology used in composite materials and structures. Anisotropic constitutive relations and Iaminate plate theories are also reviewed. Finite element models of laminated composite plates are presented in Chapter 3. Numerical evaluation of element coefficient matrices, postcomputation of strains and stresses, and sample examples of laminated plates in bending and vibration are discussed. Chapter 4 introduces damage and failure criteria in composite laminates. Finally, Chapter 5 is dedicated to case studies involving various aspects and types of composite structures. Joints, cutouts, woven composites, environmental effects, postbuckling response and failure of composite laminates are discussed by considering specific examples
Practical analysis of composite laminates by
J. N Reddy(
Book
)
8 editions published between 1995 and 2018 in English and held by 237 WorldCat member libraries worldwide
8 editions published between 1995 and 2018 in English and held by 237 WorldCat member libraries worldwide
Principles of continuum mechanics : a study of conservation principles with applications by
J. N Reddy(
Book
)
14 editions published between 2010 and 2018 in English and held by 214 WorldCat member libraries worldwide
"Continuum mechanics deals with the stress, deformation, and mechanical behaviour of matter as a continuum rather than a collection of discrete particles. The subject is interdisciplinary in nature, and has gained increased attention in recent times primarily because of a need to understand a variety of phenomena at different spatial scales. The second edition of Principles of Continuum Mechanics provides a concise yet rigorous treatment of the subject of continuum mechanics and elasticity at the senior undergraduate and firstyear graduate levels. It prepares engineerscientists for advanced courses in traditional as well as emerging fields such as biotechnology, nanotechnology, energy systems, and computational mechanics. The large number of examples and exercise problems contained in the book systematically advance the understanding of vector and tensor analysis, basic kinematics, balance laws, field equations, constitutive equations, and applications."Provided by publisher
14 editions published between 2010 and 2018 in English and held by 214 WorldCat member libraries worldwide
"Continuum mechanics deals with the stress, deformation, and mechanical behaviour of matter as a continuum rather than a collection of discrete particles. The subject is interdisciplinary in nature, and has gained increased attention in recent times primarily because of a need to understand a variety of phenomena at different spatial scales. The second edition of Principles of Continuum Mechanics provides a concise yet rigorous treatment of the subject of continuum mechanics and elasticity at the senior undergraduate and firstyear graduate levels. It prepares engineerscientists for advanced courses in traditional as well as emerging fields such as biotechnology, nanotechnology, energy systems, and computational mechanics. The large number of examples and exercise problems contained in the book systematically advance the understanding of vector and tensor analysis, basic kinematics, balance laws, field equations, constitutive equations, and applications."Provided by publisher
Mechanics of laminated composite plates : theory and analysis by
J. N Reddy(
Book
)
7 editions published in 1997 in English and held by 206 WorldCat member libraries worldwide
"Mechanics of Laminated Composite Plates: Theory and Analysis presents detailed coverage of traditional theories and higherorder theories of laminated composite materials. Much of the text is based on the author's original work on refined theories of laminated composite plates and shells, and analytical and finite element solutions. The text also contains a review of the basics of composite materials, making it suitable for introductory and graduatelevel courses, as well as a valuable reference."Jacket
7 editions published in 1997 in English and held by 206 WorldCat member libraries worldwide
"Mechanics of Laminated Composite Plates: Theory and Analysis presents detailed coverage of traditional theories and higherorder theories of laminated composite materials. Much of the text is based on the author's original work on refined theories of laminated composite plates and shells, and analytical and finite element solutions. The text also contains a review of the basics of composite materials, making it suitable for introductory and graduatelevel courses, as well as a valuable reference."Jacket
An introduction to nonlinear finite element analysis : with applications to heat transfer, fluid mechanics, and solid mechanics by
J. N Reddy(
Book
)
15 editions published between 2014 and 2015 in English and held by 188 WorldCat member libraries worldwide
The development of realistic mathematical models that govern the response of systems or processes is strongly connected to the ability to translate them into meaningful discrete models that allow for a systematic evaluation of various parameters of the systems and processes. The second edition of this book has the same objective as the first edition, namely, to facilitate an easy and thorough understanding of the details that are involved in the theoretical formulation, finite element model development and solutions of nonlinear problems
15 editions published between 2014 and 2015 in English and held by 188 WorldCat member libraries worldwide
The development of realistic mathematical models that govern the response of systems or processes is strongly connected to the ability to translate them into meaningful discrete models that allow for a systematic evaluation of various parameters of the systems and processes. The second edition of this book has the same objective as the first edition, namely, to facilitate an easy and thorough understanding of the details that are involved in the theoretical formulation, finite element model development and solutions of nonlinear problems
Theory and analysis of elastic plates and shells by
J. N Reddy(
Book
)
12 editions published between 2006 and 2007 in English and held by 176 WorldCat member libraries worldwide
12 editions published between 2006 and 2007 in English and held by 176 WorldCat member libraries worldwide
more
fewer
Audience Level
0 

1  
Kids  General  Special 
Related Identities
 Wang, C. M. Author Editor
 Lee, K. H.
 Oden, J. Tinsley (John Tinsley) 1936 Author
 Gartling, David K.
 American Society of Mechanical Engineers Winter Annual Meeting (1991 : Atlanta, Ga.)
 Wang, C. Y. (Chang Yi) 1939
 United States National Aeronautics and Space Administration
 American Society of Mechanical Engineers Applied Mechanics Division Other
 Rasmussen, M. L. Editor
 Langley Research Center
Useful Links
Associated Subjects
Approximation theory Boundary value problemsNumerical solutions Buckling (Mechanics) Buckling (Mechanics)Mathematical models Calculus of tensors Calculus of variations Civil engineering Composite construction Composite materials Composite materialsMechanical propertiesMathematical models Continuum mechanics Deformations (Mechanics) Differential equations, EllipticNumerical solutions Elastic plates and shells Engineering Engineering mathematics Finite element method Fluid dynamics Fluid dynamicsMathematical models Force and energy Functional analysis GirdersMathematical models Heat HeatTransmissionMathematical models Kinematics Laminated materials Laminated materialsMechanical propertiesMathematical models Materials Materials science Mathematical analysis Mathematics Mechanics Mechanics, Applied Mechanics, AppliedMathematics Metals Nonlinear mechanics Phase transformations (Statistical physics) Physics Plates (Engineering) Plates (Engineering)Mathematical models Shape memory alloys Shear (Mechanics) Shells (Engineering)Mathematical models Structural analysis (Engineering) Surfaces (Physics) Technology Vector algebra Vector analysis
Covers
Alternative Names
J. N. Reddy American academic
J. N. Reddy Amerikaans ingenieur
J. N. Reddy amerikansk ingeniør
J. N. Reddy amerikansk ingenjör
J. N. Reddy indischUSamerikanischer Ingenieurwissenschaftler
Junuthula Narasimha Reddy
Junuthula Narasimha Reddy 1945....
Narasimha Reddy, Junuthula 1945
Reddy, J. N.
Reddy, J. N. 1945
Reddy, J. N. (John N.), 1945
Reddy, John N.
Reddy, John N. 1945
Reddy, John W.
Reddy, Junuthula N.
Reddy, Junuthula N. 1945
Reddy, Junuthula Narasimha 1945
জে. এন. রেড্ডি
Languages