WorldCat Identities

Giessen, B. C. 1932-

Overview
Works: 45 works in 137 publications in 3 languages and 1,631 library holdings
Genres: Conference papers and proceedings 
Roles: Editor, Author, Other
Publication Timeline
.
Most widely held works about B. C Giessen
 
Most widely held works by B. C Giessen
Synthetic modulated structures by Leroy L Chang( Book )

11 editions published between 1985 and 2014 in English and held by 314 WorldCat member libraries worldwide

Materials Science and Technology Series: Synthetic Modulated Structures focuses on synthetic modulated structures, which is described as any periodically perturbed materials with a repetition greater than the basic unit cell dimension.<br><br>The book is organized into three parts. Part I provides a perspective of developments and structural characterization of the semiconductor and metal area. The electronic properties in different configurations and structures, including compositional and doping modulation are covered in Part II. Part III begins with preparation methods, followed by a discus
Developments in the structural chemistry of alloy phases by B. C Giessen( Book )

24 editions published between 1969 and 2013 in English and held by 270 WorldCat member libraries worldwide

Rapidly quenched metals : second international conference by International Conference on Rapidly Quenched Metals( Book )

10 editions published between 1976 and 2000 in English and held by 218 WorldCat member libraries worldwide

Alloy phase diagrams : symposium held November 1982 in Boston, Massachusetts, U.S.A.( Book )

9 editions published in 1983 in English and held by 203 WorldCat member libraries worldwide

Rapidly solidified amorphous and crystalline alloys : proceedings of the Materials Research Society Annual Meeting, November 1981, Boston Park Plaza Hotel, Boston, Massachusetts, U.S.A. by Materials Research Society( Book )

7 editions published in 1982 in English and held by 202 WorldCat member libraries worldwide

Rapidly solidified metastable materials : symposium held November 1983 in Boston, Massachusetts, U.S.A. by Materials Research Society Symposium( Book )

9 editions published in 1984 in English and held by 175 WorldCat member libraries worldwide

Rapidly solidified alloys and their mechanical and magnetic properties : symposium held December 2-4, 1985, Boston, Massachusetts, USA by B. C Giessen( Book )

13 editions published in 1986 in English and Undetermined and held by 163 WorldCat member libraries worldwide

Rapidly quenched metals : proceedings of the Second International Conference on Rapidly Quenched Metals, Cambridge, Massachusetts, November 17-19, 1975 by International Conference on Rapidly Quenched Metals( Book )

5 editions published in 1976 in English and held by 18 WorldCat member libraries worldwide

Alloy phase diagrams : extended abstracts( Book )

1 edition published in 1984 in English and held by 12 WorldCat member libraries worldwide

Die Zustandsschaubilder der Mehrstoffsysteme Eisen-Phosphor-Titan, Eisen-Phosphor-Silizium, Silizium-Phosphor by B. C Giessen( Book )

7 editions published between 1958 and 1960 in German and held by 8 WorldCat member libraries worldwide

Rapidly quenched metals by International Conference on Rapidly Quenched Metals( Book )

2 editions published in 1975 in English and held by 5 WorldCat member libraries worldwide

Alloy phase diagrams by Materials Research Society( Book )

1 edition published in 1983 in English and held by 5 WorldCat member libraries worldwide

Metastable transition metal alloys produced by rapid quenching : structure and properties by B. C Giessen( Book )

3 editions published in 1984 in English and held by 3 WorldCat member libraries worldwide

Metastable transition metal alloys, primarily, metallic glasses, were prepared by rapid solidification processing (melt spinning and arc-furnace hammer-and-anvil quenching); appropriate properties of these alloys were investigated. Specifically, glassy alloys containing transition metals such as Ti, Zr, Nb, Ta, Ni, Rh and Ir, as well as metals such as U, Ca and Cu and non-metallic additives such as O were studied; many of these glasses were prepared in this program for the first time. Properties studied included thermal stability (glass transition temperature and crystallization temperature), elastic modulus (measured by a newly adapted dynamic technique of impulse induced resonance), microhardness, and electrical transport (resistivity and thermoelectricity). Alloy constitution was studied. Rules for the prediction of ready glass formation based on alloy properties were formulated; a universal correlation between microhardness and elastic modulus was described. A new multilayer melt spinning technique was implemented. Nineteen publications resulted from this program and are listed in the report. (Author)
Rapidly quenched metals : part procs-2nd Int. Conf. Section I( Book )

1 edition published in 1976 in English and held by 2 WorldCat member libraries worldwide

Diagrammy faz v splavah( Book )

1 edition published in 1986 in Russian and held by 2 WorldCat member libraries worldwide

Bulk Strip Production of an Amorphous Cu-Zr Alloy by Plasma Arc Spraying by B. C Giessen( Book )

2 editions published in 1974 in English and held by 2 WorldCat member libraries worldwide

The background and design of a plasma spray unit with a rotary copper substrate and contained in an inert gas chamber is described. This unit is capable of producing amorphous alloys as strip of> 30 mil thickness in bulk quantities at rates of 15 g/min, as demonstrated by the retention of amorphous Cu. 60Zr. 40. (Author)
The constitution of metastable titanium-rich ti-fe alloys: an order-disorder transition( Book )

in English and held by 1 WorldCat member library worldwide

Establishment and Initial Operation of a Resource Facility for RSR (rapid Solidification Rate) Processed Alloys in Pilot Quantities( )

1 edition published in 1989 in English and held by 1 WorldCat member library worldwide

The program objective was to construct and operate a rapid solidification rate (RSR) processing resource facility based on melt spinning of pilot scale quantities. It consists of a controlled-atmosphere melt spinner with a capacity of 1 lb of ferrous alloy, a 100 g capacity melt spinner (to establish experimental parameters and reduce cross-contamination), and a high-speed ribbon cutter for flake preparation. RSR processed materials were delivered to Government, industrial and academic users
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.66 (from 0.37 for Barnett In ... to 0.99 for The Determ ...)

Rapidly solidified alloys and their mechanical and magnetic properties : symposium held December 2-4, 1985, Boston, Massachusetts, USA
Covers
Alternative Names
Bill Cormann Giessen Amerikaans metaalkundige (1932-2010)

Giessen, B. C.

Giessen, B. C. 1932-

Giessen, B. C. (Bill C), 1932-

Giessen, Bill C. 1932-

Giessen, Bill Cormann.

Giessen, Bill Cormann 1932-

Languages
English (104)

German (7)

Russian (1)