WorldCat Identities

Watertown Arsenal (Mass.)

Overview
Works: 182 works in 225 publications in 1 language and 1,307 library holdings
Genres: Periodicals  Bibliography  Bibliographies  Specifications 
Roles: Funder, Monitor
Classifications: TA410, 620.11
Publication Timeline
.
Most widely held works about Watertown Arsenal (Mass.)
 
moreShow More Titles
fewerShow Fewer Titles
Most widely held works by Watertown Arsenal (Mass.)
Titanium bibliography, 1900-1951 by Battelle Memorial Institute( Book )

4 editions published in 1952 in English and held by 69 WorldCat member libraries worldwide

Contents: General, Raw materials and ore preparation, Chemistry of titanium, Chemical analysis for titanium, Extraction, reduction, and refining, Foundry, Mechanical working, Powder metallurgy, Heat treatment, Joining, Cleaning, coating, and finishing, Constitution and primary structure of titanium and its alloys, Transformations and resulting structures, Physical properties, Mechanical properties and tests, Surface properties, Alloys of Ti, Applications of titanium, Applications of titanium compounds
Sintering carbides by means of fugitive binders by Lawrence S Foster( )

2 editions published in 1949 in English and held by 23 WorldCat member libraries worldwide

Coherent neutron scattering cross-section V⁵¹ by A. W McReynolds( )

2 editions published in 1951 in English and held by 23 WorldCat member libraries worldwide

Report of the tests of metals and other materials [for industrial purposes] by United States( )

3 editions published in 1915 in English and held by 22 WorldCat member libraries worldwide

Titanium bibliography : Supplement. 1952- by Battelle Memorial Institute( )

in English and held by 15 WorldCat member libraries worldwide

Drying ceramics in ultrahigh-frequency electrical fields by Watertown Arsenal (Mass.)( )

2 editions published in 1961 in English and held by 15 WorldCat member libraries worldwide

The program undertaken was designed to determine the applicability of dielectric heating to the drying of ceramic components fabricated by wet processing techniques. The general characteristics of dielectric drying were studied along with the specific moisture removal characteristics for a typical wet-processed ceramic composition (50% clay, 25% flint, 25% feldspar). The results obtained in this investigation showed that rapid drying rates for ceramics are possible with the dielectric heating method. Wet ceramic components can be heated and dried uniformly in the electric field without the development of severe temperature and moisture gradients which might lead to cracking and/or warping of the components. Although drying rates were found to be extremely high, they are limited by the rupture strength of the material, i.e., its ability to withstand the stresses developed by the pressure of the escaping water vapor. Dielectric drying holds interesting possibilities for drying high-cost ceramic components or component systems which are difficult to process by other techniques. (Author)
An Electronic Signaller to Reduce Quench-Cracking of Steel by L. D Jaffe( )

2 editions published in 1952 in English and held by 7 WorldCat member libraries worldwide

Some wear characteristics of titanium by Harry F Campbell( )

2 editions published in 1956 in English and held by 7 WorldCat member libraries worldwide

Minutes of symposium on ceramic cutting tools, Wednesday, 9 February 1955 by Watertown Arsenal (Mass.)( Book )

3 editions published between 1955 and 1957 in English and held by 6 WorldCat member libraries worldwide

The evolution of a plan by Watertown Arsenal (Mass.)( Book )

1 edition published in 1975 in English and held by 5 WorldCat member libraries worldwide

True stress-true strain properties of titanium and titanium alloys by Eric Kula( Book )

2 editions published in 1955 in English and held by 4 WorldCat member libraries worldwide

The electrodeposition of chromium alloys : a literature review by Charles Levy( )

2 editions published in 1960 in English and held by 3 WorldCat member libraries worldwide

Methods for electrodeposition of chromium-base alloys have been reported in the periodical and patent literature. Sixty-seven references are reviewed. The principal alloying elements include iron, nickel, cobalt, tungsten, and molybdenum. Ternary alloys have also been reported. Although no outstanding advances have been made to date, it is anticipated that further research in this field will yield plating methods which are both practical and economical
Report of the tests of metals and other materials made in the Ordnance Laboratory at Watertown Arsenal, Massachusetts by United States( )

in English and held by 3 WorldCat member libraries worldwide

Limit analysis of cylindrical shells under axially-symmetric loading by Daniel C Drucker( Book )

1 edition published in 1953 in English and held by 3 WorldCat member libraries worldwide

Arsenal news( )

in English and held by 3 WorldCat member libraries worldwide

Precipitation of a new phase, during non-uniform deformation, from an aluminum alloy by W Sylwestrowicz( Book )

1 edition published in 1953 in English and held by 3 WorldCat member libraries worldwide

Notes on the selection and use of metals in ordnance design by United States( Book )

2 editions published in 1926 in English and held by 3 WorldCat member libraries worldwide

A medium-speed tensile testing machine by A. G. H Andersen( Book )

1 edition published in 1961 in English and held by 3 WorldCat member libraries worldwide

 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.51 (from 0.02 for A woman's ... to 0.90 for The electr ...)

Covers
Watertown Arsenal
Alternative Names
United States. Army. Watertown Arsenal

United States. Arsenal, Watertown, Mass.

United States. Watertown Arsenal

Watertown Arsenal Laboratory (Mass.)

Languages
English (79)