WorldCat Identities

McEvily, A. J.

Overview
Works: 63 works in 203 publications in 2 languages and 2,901 library holdings
Genres: Conference papers and proceedings  Scientific atlases 
Roles: Author, Editor, Honoree, Other
Classifications: TA460, 620.1126
Publication Timeline
.
Most widely held works by A. J McEvily
Metal failures : mechanisms, analysis, prevention by A. J McEvily( )

25 editions published between 2001 and 2013 in English and held by 1,118 WorldCat member libraries worldwide

One of the only texts available to cover not only how failure occurs but also examine methods developed to expose the reasons for failure, Metal Failures has long been considered the most definitive and authoritative resources in metallurgical failure analysis. Now in a completely revised edition, this Second Edition features updates of all chapters plus new coverage of elastic behavior and plastic deformation, localized necking, the phenomenological aspects of fatigue, fatigue crack propagation, alloys and coatings, tensors and tensor
Atlas of stress-corrosion and corrosion fatigue curves by A. J McEvily( Book )

13 editions published in 1990 in English and held by 475 WorldCat member libraries worldwide

Fracture of structural materials by Alan Stephan Tetelman( Book )

15 editions published between 1966 and 1986 in English and held by 421 WorldCat member libraries worldwide

Fatigue at elevated temperatures by Symposium on Fatigue at Elevated Temperatures( Book )

17 editions published between 1973 and 2011 in English and held by 249 WorldCat member libraries worldwide

"04-520000-30. - "ASTM special technical publication 520. - Includes bibliographical references and indexes. - Electronic reproduction; W. Conshohocken, Pa; ASTM International; 2011; Mode of access: World Wide Web; System requirements: Web browser; Access may be restricted to users at subscribing institutions
Advanced materials for severe service applications by Kumiji Iida( Book )

10 editions published between 1987 and 2000 in English and Undetermined and held by 166 WorldCat member libraries worldwide

The material covered in the manuscripts published herein was subjected to public inquiry during the Japan-US Joint Seminar on Materials for Severe Service Conditions during 19-23 May 1986 at the Toranomon Pastral Guest House in Minato-Ku, Tokyo, Japan. This seminar was the latest in a series on advanced materials and applications initiated in the early 1970s by Professor T. Kanazawa of Japan and Professor A. S. Kobayashi of the United States. The 1986 seminar was organized by the undersigned with the able assistance of Professor H. Kobayashi and Dr H. Nakamura of the Tokyo Institute of Technology, and Dr K. Minakawa of the Nippon Kokan Technical Research Center. The semi­ nar was sponsored by the US National Science Foundation and by the Japan Society for Promotion of Science. This Proceedings volume is offered for its. reference value in the enhancement of the understanding of the behavior of advanced struc­ tural materials for design applications involving adverse loading con­ ditions and severe environments. During the seminar attempts were also made to extract priority issues of possible broad impact on science or technology, and to articulate possible guidelines for action plans
Corrosion fatigue; chemistry, mechanics and microstructure by National Association of Corrosion Engineers( Book )

19 editions published between 1972 and 1986 in English and held by 155 WorldCat member libraries worldwide

Bruchverhalten technischer Werkstoffe by Alan S Tetelman( Book )

7 editions published in 1971 in German and held by 47 WorldCat member libraries worldwide

A study of the oxidation of materials in an arc-image furnace by R. Gale Wilson( Book )

5 editions published in 1961 in English and held by 32 WorldCat member libraries worldwide

A series of tests on silicon carbide, graphite, nylon, Bakelite, Fiberglas phenolic, and ammonium chloride has been conducted in an arc-image furnace, with radiant heat fluxes at the specimen surfaces ranging from 100 to 1,000 Btu per square foot-sec. The effects of radiant heat flux and concentration of oxygen in the specimen environment on the rate of material loss were determined. It was found that for the upper half of the heat-flux range the rate-controlling process for materials that oxidize was the diffusion rate of oxygen to the specimen surface
Effects of constituent particles on the notch-sensitivity and fatigue-crack-propagation characteristics of aluminum-zinc-magnesium alloys by Larry H Glassman( )

3 editions published in 1962 in English and held by 29 WorldCat member libraries worldwide

Sheet specimens of two Al-Zn-Mg alloys, 7075-T6AND X7275-T6, were tested to determine the relative sensitivity to sharp notches under static loading conditions and to determine relative resistance to fatigue crack propagation. These alloys differ chiefly with respect to the number and size of constituent particles, the level being considerably lower in the X7275 alloy. Reduction in particle size and number appeared to increase somewhat the ductility of unnotched specimens without impairing the static strength, but the material with the greater constituentparticle content was more resistant to fatigue crack propagation. For both materials the sensitivity to sharp notches under static loading conditions was about the same. A discussion and interpretation of the results are given. A sufficiently large number of weakened constituent particles may have a beneficial effect on fatigue crack propagation in that they can act as crack arrestors and retard the propagation of fatigue cracks. (Author)
An investigation of nonpropagating fatigue cracks by A. J McEvily( )

3 editions published in 1959 in English and held by 29 WorldCat member libraries worldwide

The rate of fatigue-crack propagation for two aluminum alloys under completely reversed loading by Walter Illg( )

2 editions published in 1959 in English and held by 28 WorldCat member libraries worldwide

The effect of repeated stressing on the behavior of lithium fluoride crystals by A. J McEvily( Book )

3 editions published in 1961 in English and held by 20 WorldCat member libraries worldwide

Advanced materials for severe service applications 2 : papers presented at the proceedings of the Joint Japan-U.S.A. Seminar on Advanced Materials for Severe Service Applications, Honolulu, MI, U.S.A., December 2-7, 1990 by Japan-US Joint Seminar on "Advanced Materials for Severe Service Applications"( Book )

3 editions published in 1991 in English and held by 15 WorldCat member libraries worldwide

Effect of decarburization on notch sensitivity and fatigue-crack-propagation rates in 12 MoV stainless-steel sheet by William H Herrnstein( Book )

4 editions published in 1961 in English and held by 13 WorldCat member libraries worldwide

"Tests were conducted in order to determine the effect of surface decarburization on the notch-sensitivity and rate of fatigue crack propagation in 12 Mov stainless-steel sheet at room temperature. Three specimen configurations were utilized in the course of the investigation: standard tensile specimen, 9-inch-wide specimens containing fatigue cracks or thread-cut notches of 0.005-inch radius, and 2-inch-wide specimens containing fatigue cracks. The 12 Mov stainless-steel sheet in the normal condition was found to have an ultimate tensile strength of 251 ksi and to be extremely notch sensitive. The material in the decarburized condition was found to have an ultimate strength of 210 ksi and to be considerably stronger than the normal material in the presence of fatigue cracks. Decarburization did not appear to have any siinfluence incluence on the rate of fatigue crack propagation in the 2-inch-wide specimens at the stress levels considered. In addition to the tests, two methods for predicting residual static strength and their application to the material are discussed."--Summary
The effect of repeated stressing on the behavior of lithium fluoride crystals by A. J McEvily( Book )

1 edition published in 1961 in English and held by 6 WorldCat member libraries worldwide

Static strength of aluminum-alloy specimens containing fatigue cracks by A. J McEvily( Book )

4 editions published in 1956 in English and held by 6 WorldCat member libraries worldwide

Seven configurations of specimens made of 2024 and 7075 aluminum alloys in both rolled and extruded form were subjected to repeated axial loads until fatigue cracks of various lengths were formed. The specimens were then subjected to static tests to determine the residual static strength. Small cracks resulted in disproportionately large reductions of static strength, the reduction being greater for 7075 than for 2024 aluminum alloy. A simple method of analysis which predicts the observed results is developed and described
Generalized master curves for creep and rupture by George J Heimerl( Book )

2 editions published in 1957 in English and held by 6 WorldCat member libraries worldwide

The similarity of Larson-Miller master curves for rupture life and minimum creep rate is shown for aluminum, two aluminum alloys, two steels, and two high-temperature high-strength alloys. In addition, the similarity of master curves for rupture life and for 0.2- and 0.5-percent creep strain is shown for the aluminum alloys. The approximate invariance of the product of rupture life and the minimum creep rate is shown for these materials. With equivalent parameters derived on the basis of this invariance, the master curves for the various applications are generalized essentially to a single curve in the high-temperature region for each material. The minimum creep rate and the 0.2- and 0.5-percent creep strain can be determined from the master curve for rupture by this method for the materials investigated
The effect of repeated stressing on the behavior of lithium fluoride crystals by A. J McEvily( Book )

3 editions published in 1961 in English and held by 5 WorldCat member libraries worldwide

Static strength of cross-grain 7075-T6 aluminum-alloy extruded bar containing fatigue cracks by Walter Illg( Book )

2 editions published in 1957 in English and held by 4 WorldCat member libraries worldwide

Cross-grain specimens made or 7075-T6 aluminum-alloy extrusion were subjected to repeated axial loads until fatigue cracks of various lengths were formed. The specimens were then subjected to static tests to determine the residual static strength. Small cracks resulted in disproportionately large reductions of static strength. Comparison of these results with results previously obtained for loading in the with-grain direction revealed no significant difference. However, it is cautioned that cases may arise in which the cross-grain residual static strength of 7075-T6 or other materials Is considerably inferior to the with-grain residual static strength, depending upon the relative shapes of the stress-strain curves. The effects of biaxialfty and ductility on the notch sensitivity under static loading of sharply notched specimens are discussed in appendixes
Fatigue Crack Propagation in Titanium Alloys( Book )

4 editions published between 1975 and 1978 in English and held by 4 WorldCat member libraries worldwide

This research has involved studies of fatigue crack initiation as well as fatigue crack propagation. Principal findings have been that subsurface fatigue cracks can be initiated in forgings of this titanium alloy when the alpha-phase size is of the order of 10 micron, a size which can be present in large forgings. This mode of fatigue crack initiation can have a deleterious effect on long-life fatigue performance at positive mean stress levels. Results of the fatigue crack propagation studies have shown that the rate of fatigue crack growth in air and in vacuum can be analyzed in terms of a modified continuum mechanics treatment of fatigue crack growth based upon the concept that the fatigue crack growth increment per cycle is related to the extent of crack opening displacement
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.52 (from 0.39 for Metal fail ... to 0.99 for Fatigue Cr ...)

Metal failures : mechanisms, analysis, prevention
Covers
Alternative Names
Mac Evily A. J.

MacEvily A. J.

MacEvily, Arthur J.

Mc Evily A. J.

Mc Evily, Arthur J

McEvily.

McEvily, A. J.

McEvily, A. J. Jr

McEvily, Arthur J.

Ивили А. Дж.

Мак А. Дж.

Мак-Ивили, А. Дж.

マッケビリー, A. J

Languages
English (137)

German (7)