WorldCat Identities

Daily, James W.

Overview
Works: 78 works in 180 publications in 4 languages and 1,288 library holdings
Roles: Author, Other, Opponent
Classifications: QC151, 532.05
Publication Timeline
.
Most widely held works by James W Daily
Fluid dynamics by James W Daily( Book )

28 editions published between 1963 and 1973 in 3 languages and held by 410 WorldCat member libraries worldwide

Cavitation by Robert T Knapp( Book )

11 editions published between 1970 and 1979 in English and Undetermined and held by 366 WorldCat member libraries worldwide

Ignition and combustion of bulk metals in a microgravity environment : annual technical report, NASA grant no. NAG-3-1685 by M. C Branch( Book )

1 edition published in 1996 in English and held by 87 WorldCat member libraries worldwide

Ignition and combustion of bulk metals at normal, elevated, and reduced gravity : annual technical report, NASA grant no. NAG-3-1685 by M. C Branch( Book )

1 edition published in 1995 in English and held by 81 WorldCat member libraries worldwide

Ignition and combustion of bulk metals in a microgravity environment : final technical report, NASA grant no. NAG-3-1257 by M. C Branch( Book )

1 edition published in 1994 in English and held by 75 WorldCat member libraries worldwide

Dinámica de los fluidos : con aplicaciones en la ingeniería by James W Daily( Book )

13 editions published between 1969 and 1981 in Spanish and held by 27 WorldCat member libraries worldwide

Experiments on effects of unsteadiness on resistance and energy dissipation by James W Daily( Book )

4 editions published in 1956 in English and held by 17 WorldCat member libraries worldwide

The distribution of the mean static pressure in turbulent boundary layers in relation to inception of cavitation by James W Daily( Book )

5 editions published in 1959 in English and held by 16 WorldCat member libraries worldwide

Enclosed rotating disks with superposed throughflow : a survey of basic effects by James W Daily( Book )

4 editions published in 1962 in English and held by 12 WorldCat member libraries worldwide

A qualitative study was made of the flow field induced by an enclosed rotating disk with a radially outward throughflow superposed using air as the test fluid. The purpose of this survey is a determination of the range of variables at which important phenomena occur so that a quantitative study of surface resistance, pressure and velocity distribution and other observed phenomena such as unsteadiness, boundary layer separation and stall may be made. Disks of 18-1/8 inches diameter enclosed in a housing in which axial spacing could be varied from 1/8 inch to 2-1/8 inches were used in this study. Througflow was admitted in the axial direction at the front and rear of the disk housing in such a way as to make the flow on both sides of the disk as symmetrical as possible. Flow visualization was made possible using smoke injected at various points. Stroboscopic photography aided the visual observations of the flow field. Transition to turbulence was observed to be a function of the local Reynolds number ... and the axial spacing. It was observed that the torque was increased by throughflow over the corresponding value without throughflow. A systematic change in the pressure field was observed with increasing amounts of throughflow. Of particular interest is the observation under certain conditions of large periodic fluctuations, the frequency of which is related to the rotational speed, and the amount of throughflow
Rigid particle suspensions in turbulent shear flow : an improved flow facility and measurements with 0.0255" spheres by James W Daily( Book )

4 editions published in 1964 in English and held by 12 WorldCat member libraries worldwide

The effects of trailing edge geometry and chord length on the early wake of stationary flat plates by Peter S Eagleson( Book )

3 editions published in 1962 in English and held by 11 WorldCat member libraries worldwide

This report presents the results of an investigation of the average and fluctuating two-dimensional structure of the early wake of fixed, flat plates at zero mean angle of attack as a function of trailing edge configuration and chord length. The experimental program provides for the measurement of the distribution of local mean velocity, static pressure, longitudinal velocity fluctuation and the spectral distribution of the kinetic energy of this turbulence component. The investigation was carried out in the 7-1/2" x 9" test section of an open-circuit water tunnel in the MIT Hydrodynamics Laboratory. An average free stream velocity of approximately 9.5 feet per second and plates of 1/h-inch thickness were used. All measurements were made between 1.50 and 9.75 plate thicknesses downstream of the trailing edge of the test plates, and between 0 and 2.80 plate thicknesses from the longitudinal plate centerline. Plate chord lengths used were 2" and 7". A primary aim of this study is the explanation of the vibrational behavior of the same test plates as found in a previous investigation. An attempt is made, wherever possible, to draw together the related facets of both studies. Information from both investigations is combined to infer certain characteristics of the vortex street and these characteristics are compared with those found by other investigators for bodies of various shapes. The primary conclusions to be drawn from the experiments on these particular plates are: 1. Downstream increase of wake width, for a plate of given trailing edge, is suppressed to a distance dependent upon the boundary layer thickness at the trailing edge. 2. At a plate thickness Reynolds number, It = 1.8 x 10h, transition between the inertial and viscous zones of wake development takes place at approximately x/t = 3.25. 3. With distance in the downstream direction there is an increase in the transverse spacing, h, of the discrete vortices in the wake. 4. The plate thickness Strouhal number varies with trailing edge configuration at a given Reynolds number. 5. The mean drag coefficient decreases as the trailing edge becomes more tapered. 6. The strength of the discrete vortices at a given station in the early wake becomes greater as the trailing edge becomes more tapered. 7. For a plate of given thickness and trailing edge geometry an increase in chord length reduces the frequency of vortex shedding. 8. The proportion of the total wake vorticity which is concentrated in discrete vortices increases with increasing chord length Reynolds number. 9. An increase in chord length decreases the intensity of turbulence, increases the mean velocity defect and decreases the pressure recovery at a given station in the early wake. 10. For constant chord length, the amplitude of plate vibration when pivoted at the leading edge increases with increasing vortex strength and with decreasing mean drag coefficient (both quantities determined with stationary plate). 11. Barring self-excitation of the plate motion, the frequency of plate vibration is precisely that at which discrete vorticity is shed into the wake from the stationary plate
Measurement and analysis of turbulent flow of wood pulp fiber suspensions by James W Daily( Book )

4 editions published in 1959 in English and held by 10 WorldCat member libraries worldwide

In a previous report techniques were described for measuring turbulence and velocity profiles in turbulent shear flows of water and dilute fiber suspensions, and some preliminary results presented. The present report describes subsequent experience with the techniques, and the results of their application to an extended range of flow velocities and an additional wood pulp suspension. The report has two areas of emphasis. The first has to do with some basic facts about turbulence, together with relevant theoretical relations among variables and their implications as regards problems of measurement and analysis. The second relates to the specific -measurements and their significance as regards flowing fiber suspensions. The results confirm and extend the previous conclusions regarding the .mechanism of turbulence and the momentum transfer process in dilute fiber suspensions. In particular, the significance of the combined roles of turbulence and fiber entanglement in diffusion and mixing is examined in detail. The necessity of isolating these roles is discussed and recommendations presented. The procedures employed for data measurement and analysis of the statistically turbulent flow are: analyzed and recommendations made
Rigid particle suspensions in turbulent shear flow : some concentation effects by James W Daily( Book )

6 editions published in 1961 in English and Undetermined and held by 10 WorldCat member libraries worldwide

The solitary wave : its celerity, profile, internal velocities and amplitude attenuation by James W Daily( Book )

3 editions published in 1952 in English and held by 10 WorldCat member libraries worldwide

Rigid particle suspensions in turbulent shear flow : measurement of total head, velocity and turbulence with impact tubes by James W Daily( Book )

5 editions published in 1964 in English and held by 9 WorldCat member libraries worldwide

Rigid particle suspensions in turbulent shear flow : size effects with spherical particles by James W Daily( Book )

3 editions published in 1964 in English and held by 9 WorldCat member libraries worldwide

Turbulence and boundary layer effects on the inception of cavitation from gas nuclei by James W Daily( Book )

4 editions published in 1955 in English and held by 8 WorldCat member libraries worldwide

Measurements of fluid friction with steady and unsteady motion by James W Daily( Book )

3 editions published in 1952 in English and held by 7 WorldCat member libraries worldwide

A pilot model tunnel of the blow-down type is described which employs 2 tanks mounted vertically and connected by a tube, or working section. Flow from the upper tank passes through guide vanes and an entrance nozzle, through a 1-in. tube which extends inside the lower tank, and through a quick- opening valve. High-frequency-response electronic cells for measuring differential water pressures directly were used to determine loss of head along the test section and for measuring the instantaneous average velocity. The flow velocity and acceleration were governed by the difference in air pressure above the water surfaces in the upper and lower-tanks. The loss of head due to fluid friction in turbulent flow was determined for steady and unsteady flow in a 1- in.-diam smooth brass tube 9 ft long. Measurements were made in a section where the boundary layer was fully developed. Unsteady flow runs were made with average velocities of 15 to 72 ft/sec and average accelerations from 0 to 35 ft/sec sq. No appreciable difference was observed between the friction factors referred to the instantaneous velocity for steady and unsteady flow as long as the rate of acceleration was constant of changed slowly. For sudden impulses from steady flow to accelerated flow, the measured values of the wall shearing stress were below those for steady flow at the same instantaneous average velocities. This indicated a change in the distribution of internal shear stresses and velocity distribution from the steady flow distributions at the same velocity
Roughness and chamber dimension effects on induced flow and frictional resistance of enclosed rotating disks by James W Daily( Book )

2 editions published in 1958 in English and held by 6 WorldCat member libraries worldwide

Liu ti li xue by Dai Li( Book )

1 edition published in 1975 in Chinese and held by 6 WorldCat member libraries worldwide

 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.60 (from 0.56 for Fluid dyna ... to 0.88 for Liu ti li ...)

Alternative Names
Daily, J. W.

Daily, J. W. (James W.)

Dejli, Dž.

Languages
English (86)

Spanish (13)

Chinese (1)

French (1)