WorldCat Identities

Chandrashekhara, K.

Overview
Works: 23 works in 51 publications in 1 language and 386 library holdings
Roles: Author
Publication Timeline
.
Most widely held works by K Chandrashekhara
Analysis and performance of fiber composites by Bhagwan D Agarwal( Book )

18 editions published between 2006 and 2018 in English and held by 234 WorldCat member libraries worldwide

This Third Edition of the classic book in the field on fiber reinforced composite materials provides a completely updated treatment of the mechanics, materials, analysis, fabrication, characterization, and performance of composite materials
Geometrically nonlinear analysis laminated elastic structures by J. N Reddy( Book )

3 editions published in 1993 in English and held by 82 WorldCat member libraries worldwide

Manufacture and performance evaluation of FRP rebar featuring ductility and health monitoring capability by Abdeldjelil Belarbi( Book )

2 editions published in 1999 in English and held by 13 WorldCat member libraries worldwide

Experimental testing and modeling of a FRP bridge by K Chandrashekhara( Book )

2 editions published in 2000 in English and held by 13 WorldCat member libraries worldwide

Theory of plates by K Chandrashekhara( Book )

2 editions published in 2001 in English and held by 11 WorldCat member libraries worldwide

Analysis of thin concrete shells by K Chandrashekhara( Book )

6 editions published between 1986 and 2008 in English and held by 8 WorldCat member libraries worldwide

Analysis and performance of fiber composites by Bhagwan D Agarwal( )

1 edition published in 2018 in English and held by 4 WorldCat member libraries worldwide

Analysis and performance of fiber composites by Baghwan D Agarwal( Book )

1 edition published in 2018 in English and held by 3 WorldCat member libraries worldwide

Design and technologies for a smart composite bridge( )

1 edition published in 2004 in English and held by 2 WorldCat member libraries worldwide

Modeling of composite hydrogen storage cylinders using finite element analysis by K Chandrashekhara( )

1 edition published in 2008 in English and held by 2 WorldCat member libraries worldwide

Pressurized hydrogen storage cylinders are critical components of hydrogen transportation systems. Composite cylinders have pressure/thermal relief devices that are activated in case of an emergency. The difficulty in accurately analyzing the behavior of a filament would composite storage cylinder derives from continually varying orientation of the fibers. In the proposed research, a finite element model will be developed to perform thermo-mechanical analysis of storage cylinders. Optimization of design variable such as cylinder size, type of liner, fiber orientation, thickness of the various layers, and location of the pressure relief device will be performed
Geometric and material nonlinear analysis of laminated composite plates and shells by K Chandrashekhara( )

2 editions published between 1985 and 1986 in English and held by 2 WorldCat member libraries worldwide

Prospecting for antimicrobial peptides from aculeate Hymenoptera: In-Vitro Screening of venom and glandular extrats for antimicrobial activity by S Murali( )

1 edition published in 2011 in English and held by 1 WorldCat member library worldwide

Strength of concrete under biaxial compression p239-250 by K. T Sundara Raja Iyengar( Book )

1 edition published in 1965 in English and held by 1 WorldCat member library worldwide

Polyurethane foam infill for fiber-reinforced polymer (FRP) bridge deck panels by Jeffery S Volz( )

1 edition published in 2014 in English and held by 1 WorldCat member library worldwide

The objective of the research was to develop, test, and evaluate fiber-reinforced, polyurethane (PU) foams to replace the costly honeycomb construction currently used to manufacture FRP bridge deck panels. Initially, the effort focused on developing an FRP sandwich panel to replace the precast, stay-in-place forms currently used to construct reinforced concrete bridge decks. However, during the course of the project, the research effort expanded to include full-depth bridge deck panels as well. This report documents the results of this study
Modelling of concentration-dependent moisture diffusion in hybrid fibre-reinforced polymer composites( )

1 edition published in 2015 in English and held by 1 WorldCat member library worldwide

Hybrid fibre-reinforced polymer composites have extensive applications due to their high strength, cost effectiveness, improved product performance, low maintenance and design flexibility. However, moisture absorbed by composite components plays a detrimental role in both the integrity and durability of hybrid structure because it can degrade the mechanical properties and induce interfacial delamination failures. In this study, the moisture diffusion characteristics in two-phase hybrid composites using moisture concentration-dependent diffusion method have been investigated. The two phases are unidirectional S-glass fibre-reinforced epoxy matrix and unidirectional graphite fibre-reinforced epoxy matrix. In the moisture concentration-dependent diffusion method, the diffusion coefficients are not only dependent on the environmental temperature but also dependent on the nodal moisture concentration due to the internal swelling stress built during the diffusion process. A user-defined subroutine was developed to implement this method into commercial finite element code. Three-dimensional finite element models were developed to investigate the moisture diffusion in hybrid composites. A normalization approach was also integrated in the model to remove the moisture concentration discontinuity at the interface of different material components. The moisture diffusion in the three-layer hybrid composite exposed to 45℃/84% relative humidity for 70 days was simulated and validated by comparing the simulation results with experimental findings. The developed model was extended to simulate the moisture diffusion behaviour in an adhesive-bonded four-layer thick hybrid composite exposed to 45℃/84% relative humidity for 1.5 years. The results indicated that thin adhesive layers (0.12-mm thick) did not significantly affect the overall moisture uptake as compared with thick adhesive layers (0.76-mm thick)
Soy-based UV resistant polyurethane pultruded composites : phase II by K Chandrashekhara( Book )

1 edition published in 2012 in English and held by 1 WorldCat member library worldwide

Stresses in a pressurized ribbed cylindrical shell with a reinforced circular hole interrupting a rib by Catholic University of America( Book )

1 edition published in 1970 in English and held by 1 WorldCat member library worldwide

The stresses in a ribbed cylindrical shell with a reinforced circular hole intersecting one of the ribs are analyzed when the shell is subjected to internal pressure. Several experimental methods were used: brittle coatings, electrical strain gages and the photoelastic freezing technique. The results obtained here were compared with those corresponding to a ribbed shell with a reinforced circular hole between two ribs, a ribbed shell with a nonreinforced circular hole, an unribbed shell with a reinforced circular hole and an unribbed shell with a nonreinforced circular hole. (Author)
Development of experimental stress analysis methods to determine stresses and strains in solid propellant grains. stress distribution around a circular bar, with flat and spherical ends, embedded in a matrix in a triaxial stress field( Book )

1 edition published in 1969 in English and held by 1 WorldCat member library worldwide

The report deals with the stress and strain distribution around a circular bar embedded in a matrix and subjected to a mechanically applied triaxial load. The three-dimensional 'freezing' technique of photoelasticity was used. The results obtained correspond to the case of a rigid circular bar embedded in an homogeneous, elastic matrix. Two models were analyzed; in one the axis of the circular bar was parallel to the direction of the loading and in the other the axis of the circular bar was normal to the direction of loading. By combining the results obtained independently for these two cases, stress and strain distribution around the circular bar for various ratios of triaxial load can be obtained. (Author)
Corrosion resistant smart composite reinforcing bars for use in concrete by Abdeldjelil Belarbi( Book )

1 edition published in 1997 in English and held by 1 WorldCat member library worldwide

Exact and Finite-Element Analysis of Laminated Shells by J. N Reddy( Book )

1 edition published in 1983 in English and held by 1 WorldCat member library worldwide

The two parts of the report deal with the exact solutions of the linear theory and finite-element analysis of the geometrically nonlinear (i.e. the von Karman) theory of laminated, doubly-curved, shells, respectively. Numerical results are presented for both plates and shells. The results should serve as references for future investigations. (Author)
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.64 (from 0.60 for Geometrica ... to 0.99 for Developmen ...)

Analysis and performance of fiber composites
Covers
Languages
English (48)