WorldCat Identities

Vilarinho, Paula Maria

Overview
Works: 21 works in 66 publications in 3 languages and 1,369 library holdings
Genres: Conference papers and proceedings 
Roles: Editor, Author, Publishing director, Thesis advisor, Contributor, Other, htt
Classifications: TA417.23, 620.11
Publication Timeline
.
Most widely held works by Paula Maria Vilarinho
Strontium titanate : synthesis, properties and uses by Paula Maria Vilarinho( )

5 editions published in 2019 in English and Undetermined and held by 644 WorldCat member libraries worldwide

"This book provides the latest information on the developments of preparation, characterization, and application of STO and the materials based on it, with perspectives on future research. It collects the contributions of several established researchers from around the world on the fundamental mechanisms, processing, and possible uses for STO-based materials in the form of single crystals, thin films, and ceramics. This book covers a broad range of topics related to STO and materials based on it, including an overview of lattice dynamics and magnetic resonance characterization, Sr/Ti ratio, and stress induced modification of the properties, modelling, and simulation of improper ferroelectricity and multiferroic phases, dielectric responses and thermoelectric performance for tunable devices, and energy harvesting applications, respectively"--
Scanning probe microscopy : characterization, nanofabrication and device application of functional materials by Nanofabrication, and Device Application of Functional Materials NATO Advanced Study Institute on Scanning Probe Microscopy: Characterization( )

12 editions published in 2005 in English and held by 534 WorldCat member libraries worldwide

This book will contribute to the continuous education and development in the field of nanotechnology
Advanced materials forum III : proceedings of the III International Materials Symposium Materiais 2005 and XII Encontro da Sociedade Portuguesa de Materiais - SPM Universidade de Aveiro, March 20-23, Aveiro, Portugal, 2005 by International Materials Symposium (Sociedade Portuguesa de Materiais)( Book )

11 editions published in 2006 in English and held by 86 WorldCat member libraries worldwide

Volume is indexed by Thomson Reuters CPCI-S (WoS).The aim of this book is to provide the reader with the latest advanced research results on, and an improved understanding of, various aspects of the processing and characterization of materials. The various papers focus on the latest advances in the fields of Materials Science and Technology, with particular regard to the synthesis, characterization, simulation and application of materials. They cover themes ranging from the fundamental understanding of materials, right through to the fabrication of devices which exploit electronic and electro-optic materials, nanostructured and molecular materials, and biological and hybrid materials; among others.This is an ideal work for bringing the interested reader 'up-to-speed' in this subject area
Scanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional Materials by Paula Maria Vilarinho( )

16 editions published in 2005 in English and held by 66 WorldCat member libraries worldwide

As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology
Scanning probe microscopy : characterization, nanofabrication and device application of functional materials( )

1 edition published in 2006 in English and held by 12 WorldCat member libraries worldwide

As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology
Electroceramics V : International Conference on Electronic Ceramics & Applications, September 2-4,1996 by International conference on electronic ceramics & applications( Book )

3 editions published in 1996 in English and held by 5 WorldCat member libraries worldwide

Croissance, caractérisations et étude des propriétés physiques de films minces du matériau ferroélectrique Na0,5Bi0,5TiO3 by Marie Bousquet( Book )

2 editions published in 2010 in French and held by 2 WorldCat member libraries worldwide

The present work is devoted to the growth and the characterizations of epitaxial lead-free ferroelectric Na0.5Bi0.5TiO3 (NBT) thin films obtained by Pulsed Laser Deposition (PLD). In a first step, the growth deposition parameters were determined in order to obtain single-phased NBT thin films. Thus, a careful control of the chemical composition is required to elaborate single-phased NBT thin films to avoid the formation of many secondary phases (pyrochlore, Aurivillius phases...). The preliminary room temperature macroscopical hysteresis loops and piezoforce microscopy study testify to the ferroelectric activity of the elaborated material. In a second step, an epitaxial growth of NBT thin films was systematically encountered. For such purpose, various single crystals (Al2O3, MgO...) consistent with the field of optical and microwave measurements were used. In particular, the physical properties (optical and microwave) of an epitaxial NBT thin films deposited on MgO were determined. Moreover some platinum bottom electrodes presenting various orientations (i.e., (100), (110), and (111)) were employed in order to partially access the anisotropy of the properties (mainly electrical). In other words, this study permits to underline some relationships between the orientation, the microstructure and the macroscopical and local properties, particularly interesting for these NBT thin films
Effect of Mg doping on the structural and dielectric properties of strontium titanate ceramics by A Tkach( )

1 edition published in 2003 in English and held by 2 WorldCat member libraries worldwide

Electroceramics V( Book )

2 editions published in 1996 in English and held by 2 WorldCat member libraries worldwide

Effect of Annealing Temperature on Structural and Optical Properties of Sol-Gel-Derived ZnO Thin Films by Mohd Arif( )

1 edition published in 2018 in English and held by 2 WorldCat member libraries worldwide

Proceedings of the III International Materials Symposium Materiais 2005 and XII Encontro da Sociedade Portuguesa de Materiais - SPM : Universidade de Aveiro, March 20-23, Aveiro, Portugal, 2005 by International Materials Symposium( Book )

2 editions published in 2006 in English and held by 2 WorldCat member libraries worldwide

Relajación dieléctrica en materiales cerámicos Pb(Fe2 by L Zhou( )

1 edition published in 1998 in Spanish and held by 1 WorldCat member library worldwide

ChemInform Abstract: Pyrochlore and Perovskite Potassium Tantalate: Enthalpies of Formation and Phase Transformation( )

1 edition published in 2015 in English and held by 1 WorldCat member library worldwide

Mechanical strain engineering of dielectric tunability in polycrystalline SrTiO3 thin films1( )

1 edition published in 2018 in English and held by 1 WorldCat member library worldwide

Low-temperature dielectric relaxations in Y-doped strontium titanate ceramics( )

1 edition published in 2015 in English and held by 1 WorldCat member library worldwide

Abstract: The structural and low-frequency dielectric properties of Y-doped strontium titanate ceramics prepared by the conventional mixed oxide method are investigated. The lattice parameter is found to decrease linearly in the Sr1 − 1.5 x Y x TiO3 system, confirming the incorporation of Y onto the Sr site of perovskite lattice of strontium titanate up to the solid solubility limit below x = 0.05. The real and imaginary parts of the dielectric permittivity of Sr1 − 1.5 x Y x TiO3 ceramics exhibit a relaxation between 100 Hz and 1 MHz in the temperature range 10-40 K, slightly shifting to higher temperatures with increasing Y content. Such dielectric behavior, yielding real part of the dielectric permittivity up to 35 000, is attributed to the relaxation of individual dipoles formed by off-center displacement of Y 3+ ions on Sr sites in a highly polarizable lattice of strontium titanate. The other dielectric relaxation observed in Sr1 − 1.5 x Y x TiO3 from 125 to 300 K is attributed to the oxygen vacancy related mechanisms
Comportamiento de relajación dieléctrica en cerámicas (Ba0.2Sr0.8) TiO3 dopadas con bismuto by L Zhou( )

1 edition published in 1999 in Spanish and held by 1 WorldCat member library worldwide

 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  General Special  
Audience level: 0.22 (from 0.04 for Strontium ... to 0.99 for Relajació ...)

Scanning probe microscopy : characterization, nanofabrication and device application of functional materials Scanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional Materials Scanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional Materials Proceedings of the NATO Advanced Study Institute on Scanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional Materials Algarve, Portugal 1-13 October 2002 Scanning probe microscopy: characterization, nanofabrication and device application of functional materials : [proceedings of the NATO Advanced Study Institute on Scanning Probe Microscopy: characterization, nanofabrication and device application of functional materials, Algarve, Portugal, 1-13 Oct. 2002]
Covers
Scanning probe microscopy : characterization, nanofabrication and device application of functional materialsAdvanced materials forum III : proceedings of the III International Materials Symposium Materiais 2005 and XII Encontro da Sociedade Portuguesa de Materiais - SPM Universidade de Aveiro, March 20-23, Aveiro, Portugal, 2005Scanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional MaterialsScanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional Materials Proceedings of the NATO Advanced Study Institute on Scanning Probe Microscopy: Characterization, Nanofabrication and Device Application of Functional Materials Algarve, Portugal 1-13 October 2002Scanning probe microscopy: characterization, nanofabrication and device application of functional materials : [proceedings of the NATO Advanced Study Institute on Scanning Probe Microscopy: characterization, nanofabrication and device application of functional materials, Algarve, Portugal, 1-13 Oct. 2002]Advanced materials forum III. Part 1 : Proceedings of the III International Materials Symposium Materiais 2005 and XII Encontro da Sociedade Portuguesa de Materiais -SPM, Universidade de Aveiro, March 20-23, Aveiro, Portugal, 2005Advanced materials forum III. Part 2 : Proceedings of the III International Materials Symposium Materiais 2005 and XII Encontro da Sociedade Portuguesa de Materiais -SPM, Universidade de Aveiro, March 20-23, Aveiro, Portugal, 2005
Alternative Names
Vilarinho P.M.

Vilarinho, Paula M.

Languages