Fowler, Vernon J.
Most widely held works by Vernon J Fowler
Hot carrier phenomena in semiconductors at microwave frequencies ( Book )
3 editions published in 1962 in English and held by 1 library worldwide
Measurements of recombination in Cu- and Ni- doped Ge, using contact injection, were made and corrected for surface recombination. The data for Ge:Ni at room and dry ice temps. are similar; for Ge:Cu they are different in that lifetime first increases with field, then decreases at the low temp. Throughout this temp. range, the following appear to be established; (1) the electron capture cross section for neutral Ni and neutral Cu decreases rapidly with electron speed; and (2) for Cu( - ) it is essentially independent of speed. The difference in speed-dependence of neutral and negatively-charged centers seems attributable to the Coulomb barrier of the latter. Complex conductivities of n-Ge are reported for 3 samples in different orientations and comparable dc resistivites at 78k. For n-InSb at 78k, large negative values of dielectric constant were found. (Author).
1977 SID International Symposium by SID International Symposium on Information Display ( Book )
1 edition published in 1977 in English and held by 1 library worldwide
Flat panel color television by Vernon J Fowler ( Book )
1 edition published in 1974 in English and held by 1 library worldwide
Recent advances in flat panel color television by Vernon J Fowler ( Book )
1 edition published in 1976 in English and held by 1 library worldwide
Wide-Angle Rotating-Mirror Scan System for Use in Laser Display System ( Book )
1 edition published in 1970 in English and held by 1 library worldwide
The program covers the design development and fabrication of a wide-angle rotating mirror scanner for use in laser display systems. A hysteresis synchronous motor designed for operation at 300,000 rpm and emplying gas bearings was fabricated and tested. Operation to 240,000 rpm was achieved with ball bearings, while limited success was obtained with gas bearings. In addition, hydrostatic gas-film-lubricated bearings made from copper impregnated tungsten were fabricated and tested. (Author).