Li, Chong
Overview
| Works: | 14 works in 14 publications in 2 languages and 20 library holdings |
|---|---|
| Roles: | Author, Other |
Publication Timeline
.
Most widely held works by
Chong Li
Microstructural Characterization and Phase Separation Sequences During Solidification of Ni3Al-Based Superalloy by
Jing Wu(
)
1 edition published in 2017 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2017 in English and held by 2 WorldCat member libraries worldwide
Analysis for forced response of a non-contact piezoelectric driving system modulated by electromagnetic field under coupling
excitation by Jichun Xing(
)
1 edition published in 2018 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2018 in English and held by 2 WorldCat member libraries worldwide
A Transition Size of Dividing Crack Initiation and Propagation Phases and the Fatigue Total Life Prediction Approach by
Chong Li(
)
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
<> by Xingchuan Xia(
)
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
Design of an ultrasonic motor with multi-vibrators by
Chong Li(
)
1 edition published in 2016 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2016 in English and held by 2 WorldCat member libraries worldwide
Instabilité de Rayleigh-Bénard dans les fluides à seuil : critère de démarrage, expériences et modélisation by
Chong Li(
)
1 edition published in 2015 in French and held by 2 WorldCat member libraries worldwide
In this thesis, three main mechanisms proposed in a recent paper (Darbouli et al., Physics of fluids, 25(2) 2013) have been discussed to explain the onset of Rayleigh Bénard Convection in a yield fluid (Carbopol gels): i) the elasto-visco-plasticity behavior of the material below the yield stress, ii) a viscosity at low values of shear rates by creep measurements below the yield stress, iii) a microscopic viewpoint considering the fluid as a porous two phases system. No-slip conditions have been achieved for all the experiments. The results with different Carbopol gels have proved the importance of Y, the yield number which presents the report of the yield stress and the buoyancy effect, as the governing parameter. The critical value of Y^(-1) with no-slip condition has been found between 60 and 90. A visualization measurement with the utilization of thermochromics liquid crystals presents a global view from above. Different structures have been observed in different states of thermal conditions, which describe the evolution of the convection. For several cases the color of the liquid crystals can indicate the temperature field in the whole experiment cell. Numerical simulations with a Herschel-Bulkley model have also been discussed in this thesis. The dimensionless parameters are defined approaching the values obtained in the experiments, so that we can compare the numerical results with some of experimental ones
1 edition published in 2015 in French and held by 2 WorldCat member libraries worldwide
In this thesis, three main mechanisms proposed in a recent paper (Darbouli et al., Physics of fluids, 25(2) 2013) have been discussed to explain the onset of Rayleigh Bénard Convection in a yield fluid (Carbopol gels): i) the elasto-visco-plasticity behavior of the material below the yield stress, ii) a viscosity at low values of shear rates by creep measurements below the yield stress, iii) a microscopic viewpoint considering the fluid as a porous two phases system. No-slip conditions have been achieved for all the experiments. The results with different Carbopol gels have proved the importance of Y, the yield number which presents the report of the yield stress and the buoyancy effect, as the governing parameter. The critical value of Y^(-1) with no-slip condition has been found between 60 and 90. A visualization measurement with the utilization of thermochromics liquid crystals presents a global view from above. Different structures have been observed in different states of thermal conditions, which describe the evolution of the convection. For several cases the color of the liquid crystals can indicate the temperature field in the whole experiment cell. Numerical simulations with a Herschel-Bulkley model have also been discussed in this thesis. The dimensionless parameters are defined approaching the values obtained in the experiments, so that we can compare the numerical results with some of experimental ones
Dynamic optimization of an electromechanical integrated harmonic piezoelectric motor by
Chong Li(
)
1 edition published in 2018 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2018 in English and held by 2 WorldCat member libraries worldwide
Microstructural evolution and constitutive models of 9CrMoCoB heat-resistant steel during high-temperature deformation by Chao-hang Jia(
)
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
Microstructures and erosion-corrosion behavior of Fe-B alloy containing chromium and nickel by Da-wei Yi(
)
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 2 WorldCat member libraries worldwide
Compressive effect of the magnetic field on the positron range in commonly used positron emitters simulated using Geant4 by
Chong Li(
)
1 edition published in 2017 in English and held by 2 WorldCat member libraries worldwide
1 edition published in 2017 in English and held by 2 WorldCat member libraries worldwide
Thermal analysis of VCSEL arrays based on first principle theory and finite element method by
Congcong Wang(
)
1 edition published in 2019 in English and held by 0 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 0 WorldCat member libraries worldwide
Herringbone Structure and Significantly Enhanced Hardness in W-Modified Ti2AlNb Alloys by Spark Plasma Sintering by
Junpeng Yang(
)
1 edition published in 2019 in English and held by 0 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 0 WorldCat member libraries worldwide
Design and Thermal Analysis of the Large Fire Door for AP1000 Nuclear Reactor by
Shanwen Zhang(
)
1 edition published in 2019 in English and held by 0 WorldCat member libraries worldwide
1 edition published in 2019 in English and held by 0 WorldCat member libraries worldwide
Microstructural Feature and Evolution of Rapidly Solidified Ni3Al-Based Superalloys by Ye-Fan Li(
)
1 edition published in 2018 in English and held by 0 WorldCat member libraries worldwide
1 edition published in 2018 in English and held by 0 WorldCat member libraries worldwide
more
fewer
Audience Level
| 0 |
 |
1 | ||
| Kids | General | Special | ||
Related Identities
- SpringerLink (Online service) Other
- Xing, Jichun Other Author
- Liu, Yong-chang Other
- Li, Hui-jun Other
- Magnin, Albert Opponent Thesis advisor
- He, Xin
- Ding, Jian
- Jay, Pascal Other
- Peng, Yuanyi
- Wang, Baoyi Other